Auto Glass Tools - Equalizer®

Spray Bottle

IP SBS732

$6.00

This sprayer adjusts to dispense a fine, medium, or heavy mist. The sprayer is made of polypropylene. The bottle is made of high-density polyethylene.

Holds 8 ounces of liquid.  

Equalizer® Cutting Lubricant

IP ECL784

$10.00

Using our lubricant improves cutting action and reduces drag on the blade. It will not damage the dash or headliner. Mix at a 16 to 1 ratio (16 parts water to 1 part cutting lubricant) to make 128 ounces of cutting lubricant. The ECL784 contains no dyes, fragrances or VOC’s so that means when you spray the product in a hot car, it won’t take your breath away! Also, it evaporates slower providing a longer lubricating period.

Made in the USA.

8 Oz Bottle.

Super Lube® Sheath Lubricant

IP SLL347

$10.00

This is a high-heat grease made for lubricating the inside of the sheath where contact with the blade sometimes can occur. This contact usually happens when a blade must curve in order to ride against the glass. This curving of the blade pushes it against the sheath and causes wear on both the blade and sheath if no lubricant is used. Using a small amount of our Super Lube® Sheath Lubricant on the inside of the sheath will extend the life of your sheath. This clear, non-toxic formula protects in temperatures ranging from -45°F to + 450°F and its effectiveness will not be reduced by cutting lubricant or water. 3 Oz.

Course Diamond File

IP LTB275

$11.00

Our Diamond Files are made of monocrystalline diamonds and their strong, single-crystal structure does not break apart with use. If you want to use a lubricant, use only water. To clean them just scrub with a bristle brush and dishwashing soap. The red file is fine and will put a razor edge on your cutting tools. The blue file is coarse and will sharpen blades like a normal file. Total length is 7" long and the file area measures 2-1/2" long which takes up very little room in your toolbox.

Fine Diamond File

IP LTR274

$11.00

Our Diamond Files are made of monocrystalline diamonds and their strong, single-crystal structure does not break apart with use. If you want to use a lubricant, use only water. To clean them just scrub with a bristle brush and dishwashing soap. The red file is fine and will put a razor edge on your cutting tools. The blue file is coarse and will sharpen blades like a normal file. Total length is 7" long and the file area measures 2-1/2" long which takes up very little room in your toolbox.

Express® Blade Sharpener

IP SFE329

$19.00

Retain the chisel edge on your Express® Blades!

To get the best performance, it is important to put a good edge on the blade every time you use your auto glass cut-out knife. Since you do not always have access to a bench grinder, this sharpener will do that quick touch up that brings the blade back to a razor-sharp edge. You can sharpen the blade in about 10 seconds by dragging the sharpener across the blade 3 or 4 times. All off-the-shelf sharpeners will put a V-type edge on the blade and this type of sharpening can prevent the tool from working properly. Our Express® Blade Sharpener puts the chisel-type edge on the blade and keeps your auto glass cut-out knife operating at peak performance. It also features a built-in protector to keep you from cutting your hand on the blade.

Express® Sheath

IP ES1406

$30.00

The sheath is a unique idea that allows the Equalizer® auto glass cut-out knives to use a flexible blade and still have the strength to cut the toughest urethane. Equalizer® Express® Blades come in longer and shorter sizes, but there is only one size sheath and it fits all Equalizer® tools that utilize the Express® Blades.

Made in the USA.

Express® Blade • 3" X 10"

IP BFE1400

$42.00

Equalizer® Express® Blades are developed for use on hundreds of different vehicles.

The BFE1400 is the most used size and is perfect for slicing through wide bands of urethane.  It works well in all plcaes where you need to plunge cut or angle cut.

This blade can also be used with our Express® Blade Handle or PushKnife.

Made of a proprietary grade of stainless steel.

Made in the USA.

Express® Blade • 1.5" X 10"

IP BFE1401

$42.00

Equalizer® Express® Blades are developed for use on hundreds of different vehicles.

The BFE1401 is the most widely used size and is perfect for slicing through wide bands of urethane. It works well in all areas where plunge cut or angle cut are used.

This blade can also be used with our Express® Blade Handle or PushKnife.

Made of a proprietary grade of stainless steel.

Made in the USA.

Standard HydroBlade™ • 1-1/2" x 10"

IP EHB145

$42.00

Equalizer® HydroBlades™ have a series of small dimples stamped on the side of the blade that rides against the urethane. These dimples are designed to carry cutting lubricant into the urethane that is being cut by the blade. With each stroke, the blade picks up cutting lubricant on the outside of the urethane and deposits it inside the urethane allowing for each additional stroke of the blade to slide easily through the urethane. Besides making the blade cut easier they also save battery life and reduce vibration because of the reduced friction on the blade.

Made of a proprietary grade of stainless steel.

Made in the USA.

Standard Hydroblade™ • 3" X 10"

IP EHB186

$42.00

Equalizer® HydroBlades™ are designed to carry cutting lubricant into the urethane that is being cut by the blade. With each stroke, the blade picks up cutting lubricant on the outside of the urethane and deposits it inside the urethane.

The cutting lubricant allows for each additional stroke of the blade to slide easily through the urethane. The blades are made of stainless steel and have a series of small dimples stamped on the side of the blade that rides against the urethane. Besides making the blade cut easier they also save battery life and reduce vibration because of the reduced friction on the blade.

Made of a proprietary grade of stainless steel.

Made in the USA.

Standard HydroBlade™ - 3" x 14"

IP EHE160

$42.00

Equalizer® HydroBlades™ have a series of small dimples stamped on the side of the blade that rides against the urethane. These dimples are designed to carry cutting lubricant into the urethane that is being cut by the blade. With each stroke, the blade picks up cutting lubricant on the outside of the urethane and deposits it inside the urethane allowing for each additional stroke of the blade to slide easily through the urethane. Besides, make the blade cut easier they also save battery life and reduce vibration because of the reduced friction on the blade.

Made of a proprietary grade of stainless steel.

Made in the USA.

Express® Specialty HydroBlade™ • 10"

IP EHF173

$42.00

Now Serrated For An Even Better Cut!

Some areas require side-to-side cutting. This is more common around very radical curves in the glass, and in vehicles that have corners with a sharper-than-90° angle. It can be difficult to get all the way up into these corners with a square-end blade, but with the round tip it will reach up into the corner and cut the urethane. This blades can also be used with our Express Blade Handle.

Made of a proprietary grade of stainless steel.

Made in the USA.

Standard HydroBlade™ • 1-1/2" x 12"

IP EHL146

$42.00

Equalizer® HydroBlades™ have a series of small dimples stamped on the side of the blade that rides against the urethane. These dimples are designed to carry cutting lubricant into the urethane that is being cut by the blade. With each stroke, the blade picks up cutting lubricant on the outside of the urethane and deposits it inside the urethane allowing for each additional stroke of the blade to slide easily through the urethane. Besides making the blade cut easier they also save battery life and reduce vibration because of the reduced friction on the blade.

Made of a proprietary grade of stainless steel.

Made in the USA.

Standard Hydroblade™ • 3" X 12"

IP EHL187

$42.00

Equalizer® HydroBlades™ are designed to carry cutting lubricant into the urethane that is being cut by the blade. With each stroke the blade picks up cutting lubricant on the outside of the urethane and deposits it inside the urethane.

The cutting lubricant allows for each additional stroke of the blade to slide easily through the urethane

The blades are made of stainless steel and have a series of small dimples stamped on the side of the blade that rides against the urethane. Besides making the blade cut easier they also save battery life and reduce vibration because of the reduced friction on the blade.

Made of a proprietary grade of stainless steel.

Made in the USA.