Auto Glass Tools - Equalizer®

DeWalt™ 12V Charger - 20 Volt Li-Ion Battery

IP DCB119

$182.00

12-Volt Automotive Charger for  20-Volt Li-Ion Battery Charger.

Can be used with our 20-Volt Battery DCB200

DeWalt® 20-Volt Li-Ion Battery

IP DCB205

$147.00

20-Volt Li-Ion Battery

Now a 5.0 Ah high capacity battery pack!

Equalizer® Ambush™

IP ATV2012

$841.00

Express® Blade • 1.5" X 10"

IP BFE1401

$42.00

Equalizer® Express® Blades are developed for use on hundreds of different vehicles.

The BFE1401 is the most widely used size and is perfect for slicing through wide bands of urethane. It works well in all areas where plunge cut or angle cut are used.

This blade can also be used with our Express® Blade Handle or PushKnife.

Made of a proprietary grade of stainless steel.

Made in the USA.

Express® Blade • 1.5" X 12"

IP LBE1403

$42.00

Equalizer® Express® Blades are developed for use on hundreds of different vehicles.

The LBE1403 blade is perfect for removing glass that is not broken. Its narrow width is more flexible, which puts less stress on the glass.

This blade can also be used with our Express® Blade Handle or PushKnife.

Made of a proprietary grade of stainless steel.

Made in the USA.

Express® Blade • 3" X 10"

IP BFE1400

$42.00

Equalizer® Express® Blades are developed for use on hundreds of different vehicles.

The BFE1400 is the most used size and is perfect for slicing through wide bands of urethane.  It works well in all plcaes where you need to plunge cut or angle cut.

This blade can also be used with our Express® Blade Handle or PushKnife.

Made of a proprietary grade of stainless steel.

Made in the USA.

Express® Blade • 3" X 14"

IP RLE1404

$42.00

Equalizer® Express® Blades are developed for use on hundreds of different vehicles.

The RLE1404 work well where the urethane is very deep below the dash.

This blade can also be used with our Express® Blade Handle or PushKnife.

Made of a proprietary grade of stainless steel.

Made in the USA.

Express® Blade Sharpener

IP SFE329

$19.00

Retain the chisel edge on your Express® Blades!

To get the best performance, it is important to put a good edge on the blade every time you use your auto glass cut-out knife. Since you do not always have access to a bench grinder, this sharpener will do that quick touch up that brings the blade back to a razor-sharp edge. You can sharpen the blade in about 10 seconds by dragging the sharpener across the blade 3 or 4 times. All off-the-shelf sharpeners will put a V-type edge on the blade and this type of sharpening can prevent the tool from working properly. Our Express® Blade Sharpener puts the chisel-type edge on the blade and keeps your auto glass cut-out knife operating at peak performance. It also features a built-in protector to keep you from cutting your hand on the blade.

Express® Blade • 3" X 12"

IP LBE1402

$42.00

Equalizer® Express® Blades are developed for use on hundreds of different vehicles.

The LBE1402 work well where the urethane is far below the glass, but there is a limited amount of vertical space inside the vehicle.

This blade can also be used with our Express® Blade Handle or PushKnife.

Made of a proprietary grade of stainless steel.

Made in the USA.

Express® Sheath

IP ES1406

$30.00

The sheath is a unique idea that allows the Equalizer® auto glass cut-out knives to use a flexible blade and still have the strength to cut the toughest urethane. Equalizer® Express® Blades come in longer and shorter sizes, but there is only one size sheath and it fits all Equalizer® tools that utilize the Express® Blades.

Made in the USA.

Express® Specialty HydroBlade™ • 10"

IP EHF173

$42.00

Now Serrated For An Even Better Cut!

Some areas require side-to-side cutting. This is more common around very radical curves in the glass, and in vehicles that have corners with a sharper-than-90° angle. It can be difficult to get all the way up into these corners with a square-end blade, but with the round tip it will reach up into the corner and cut the urethane. This blades can also be used with our Express Blade Handle.

Made of a proprietary grade of stainless steel.

Made in the USA.

Piranha™ Blade • 3"W x 10"L

IP PHB169

$48.00

The Equalizer^® Piranha^™ blade uses the same cutting technology as the original HydroBlade^™ but also incorporates serration on a portion of each side of the blade, making a cutting action from left to right and right to left much easier.

Piranha™ Blade • 3"W x 12"L

IP PHB174

$48.00

The Equalizer^® Piranha^™ blade uses the same cutting technology as the original HydroBlade^™ but incorporates serration on portions of each side of the blade, making the cutting action from side to side much easier.

Piranha™ Blade • 3"W x 14"L

IP PHB175

$53.00

The Equalizer^® Piranha^™ blade uses the same cutting technology as the original HydroBlade^™ but also incorporates serration on a portion of each side of the blade, making a cutting action from left to right and right to left much easier.

Quarter Glass & Corner HydroBlade™ • Driver Side

IP HQS177

$42.00

Many quarter glasses come to a sharp point in the back and can be difficult to remove. These blades are designed to reach into those difficult areas and cut the urethane with a serration for an even better cut!. They are also very useful for those vehicles that have corners with sharp angles. It can be very challenging to reach into some of those corners to cut the urethane. The blades are very flexible to allow the tool to be held outside the quarter glass opening while cutting inside. Each blade is designed for a specific side of the vehicle.

Made of a proprietary grade of stainless steel.

Made in the USA.

Equalizer® Quarter Glass & Corner HydroBlade™ • Driver Side

1-3/8" Wide, 12" Long • Driver Side