Fein® SuperCut Cordless Tool

IP AFSC17

$949.00

Fein^® SuperCut Cordless

Fein^® tools were introduced into the auto glass industry in the early 1980s and remain one of the most used auto glass removal tools in the world. Fein® has worked to refine their original design and today the Fein® SuperCut has a streamlined design, high power motor, and variable speed control. The tool is of the highest quality and uses ball and needle bearings together with a gearbox designed for continuous use and heavy loads.

Each AFSC17 kit includes 1-Fein® SuperCut Cordless, one blade tool, two rechargeable batteries, and a DVD users guide. Everything comes neatly packaged in a plastic carrying case.

BlackHawk™ 20-Volt Tool

IP BH2019

$841.00

BlackHawk™ has a heavy-duty, 20-Amp brushless motor to provide ample power for quickly removing the most difficult glass. It’s compact and lightweight design allows for maneuvering tight areas and features a bright LED light to provide visibility in dark work areas.

Fein Air-Powered SuperCut

IP MLX625

$365.00

The Fein® Air-Powered SuperCut runs at a maximum speed of 20,000 rpm making it a very fast cutting tool. The recommended air pressure is 90 psi and the fact that it consumes 23 CFM tells you that it has tremendous power. It is compact, measuring only 8" long x 1-3/4" wide x 1-3/4" tall, and weighs less than 2 pounds. One unusual thing about the tool is the method that is used to change the blades. Unlike other tools, the Fein® Air-Powered SuperCut uses a double wrench tightening system that prevents pressure from being applied to the drive bearing when the blade is tightened. Comes with 1-Fein® Air-Powered SuperCut and two blade wrenches. 

PUSH KNIFE™ Set

IP PKS102

$236.00

PUSH KNIFE™ is a machined aluminum hand tool designed to remove quarter glasses utilizing Equalizer® Express® Blades. PUSH KNIFE features a rectangular plate for striking with a rubber mallet, enabling power from the mallet to be transferred to the blade and through the urethane.
Equalizer® Express® blades can be easily changed out by unscrewing the hinged plate that locks the blade in place.

Includes all three sizes. 

ZipKnife™ Long Knife Set

IP ZKS90

$173.00

ZipKnife™ Long Knives are made with an extremely thin utility knife bracket and a quick blade replacement design. The knives have no screws, levers or devices lessening the chance for damaging a vehicle. Uses all standard utility knife blades.

Bullet™ Blade 3” W x 10”

IP REB262

$42.00

Bullet™ Blades are elongated, rounded blades designed to cut from all angles. Their unique shape and sharpening make side-to-side cutting easier and make slicing through wide beads of urethane a breeze.

3" W x 10” 

Bullet™ Blade 3” W x 14” L

IP REE264

$42.00

Bullet™ Blades are elongated, rounded blades designed to cut from all angles. Their unique shape and sharpening make side-to-side cutting easier and make slicing through wide beads of urethane a breeze.

3” W x 14” L

Bullet™ Blade - 1-1/2” W x 12” L

IP REL261

$42.00

Bullet™ Blades are elongated, rounded blades designed to cut from all angles. Their unique shape and sharpening make side-to-side cutting easier and make slicing through wide beads of urethane a breeze.

1-1/2” W x 12” L

Bullet™ Blade • 3” W x 12” L

IP REL263

$42.00

Bullet™ Blades are elongated, rounded blades designed to cut from all angles. Their unique shape and sharpening make side-to-side cutting easier and make slicing through wide beads of urethane a breeze.

3” W x 12” 

ZipKnife™ Cold Knife Set

IP ZKS80

$163.00

ZipKnife™ Cold Knife has a unique design that allows you to maintain a high level of control at the cutting head, giving you the freedom to move unencumbered while exerting pressure in both cutting directions.

Uses all standard cold knife blades.

Set includes 1-ZK35, Zipknife and 1-ZK45-Compact Zipknife. 

Extractor Narrow Blade 5 3/4"

IP EXT-BLDN

$23.50

Most Extractor blades are now made from stainless steel, and have been cut and tapered to our exacting, custom specifications. The blades offer excellent flexibility and strength. If used correctly, they should last 200 cut-outs or more. Many users report 300 - 400 cut-outs. For best results it is necessary to keep the blade sharp and use adequate water for lubrication. The blades are very easy to sharpen. Simply run across a wet belt sander, grinder or file, putting a 45 degree edge on one side of the blade, in the same manner as you would sharpen a chisel.

Extractor Narrow Blade 8"

IP EXT-BLDN-XL

$33.00

Most Extractor blades are now made from stainless steel, and have been cut and tapered to our exacting, custom specifications. The blades offer excellent flexibility and strength. If used correctly, they should last 200 cut-outs or more. Many users report 300 - 400 cut-outs. For best results it is necessary to keep the blade sharp and use adequate water for lubrication. The blades are very easy to sharpen. Simply run across a wet belt sander, grinder or file, putting a 45 degree edge on one side of the blade, in the same manner as you would sharpen a chisel.

Extractor Narrow Blade 10"

IP EXT-BLDN-XXL

$35.00

Most Extractor blades are now made from stainless steel, and have been cut and tapered to our exacting, custom specifications. The blades offer excellent flexibility and strength. If used correctly, they should last 200 cut-outs or more. Many users report 300 - 400 cut-outs. For best results it is necessary to keep the blade sharp and use adequate water for lubrication. The blades are very easy to sharpen. Simply run across a wet belt sander, grinder or file, putting a 45 degree edge on one side of the blade, in the same manner as you would sharpen a chisel.

Extractor Delta Blade 6 3/4"

IP EXT-DELTA-L

$28.50

Most Extractor blades are now made from stainless steel, and have been cut and tapered to our exacting, custom specifications. The blades offer excellent flexibility and strength. If used correctly, they should last 200 cut-outs or more. Many users report 300 - 400 cut-outs. For best results it is necessary to keep the blade sharp and use adequate water for lubrication. The blades are very easy to sharpen. Simply run across a wet belt sander, grinder or file, putting a 45 degree edge on one side of the blade, in the same manner as you would sharpen a chisel.

Extractor Delta Blade 7 3/4"

IP EXt-DELTA-XL

$32.50

Most Extractor blades are now made from stainless steel, and have been cut and tapered to our exacting, custom specifications. The blades offer excellent flexibility and strength. If used correctly, they should last 200 cut-outs or more. Many users report 300 - 400 cut-outs. For best results it is necessary to keep the blade sharp and use adequate water for lubrication. The blades are very easy to sharpen. Simply run across a wet belt sander, grinder or file, putting a 45 degree edge on one side of the blade, in the same manner as you would sharpen a chisel.