Terminator® White O-Ring

IP TOW716

$2.00

O-Rings for Terminator® repair system.

Terminator® Black O-Ring

IP TOB717

$2.50

O-Rings for Terminator® repair system.

Honda & Acura Cowling Clip • 10

IP 90602

$4.00

Honda & Acura Cowling Clips.

Works on 2008-Current

•    Honda Accord & Fit
•    Acura TSX and ZDX

Honda & Acura Moulding Clip • 5

IP 91570

$4.00

Honda & Acura Moulding Clips.

Works on 2009-2016

•     Honda Pilot and Odyssey
•     Acura ZDX and MDX

KlingOn™ Single Shot

IP KSS201

$5.00

Single application (0.5ml) of KlingOn™ Rearview Mirror Adhesive. Equalizer® KlingOn™ Slingle Shot Rearview Mirror Adhesive has a squeeze-on primer. The adhesive has a gel-like consistency to keep it from running down the windshield.

To use KlingOn™, clean the glass and mirror bracket thoroughly. Apply the primer on the glass where the bracket will be installed and then apply the primer on the mirror bracket. Let the primer dry  then apply the adhesive to the bracket. When you are ready to install the rearview mirror bracket, be careful to place it exactly where you want it. Be sure and wait 3-4 minutes before installing the rearview mirror back onto the bracket.

Door Panel Removal Tool

IP DCR244

$10.00

General purpose door panel removal tool.

Made of hardened steel.

Terminator® UV Shield

IP TUS720

$11.00

UV Shield for Terminator® repair system.

Equalizer® Flip-Top Magnetic Screwdriver 11"

IP EMS766

$15.00

Comes with six bits: #1, #2, #3 Phillips and #3, #5, #8 slotted, stored in the flip-cap handle.

BTB Narrow "Winged" Anti-Scratch Pinchweld Preparation Blade • 1-9/16" Wide

IP WK640N

$16.00

The narrow profile blades provide better clearance when working closely against pinchwelds, roof panels, A-pillars, and trim.

BTB Narrow "Winged" Anti-Scratch Pinchweld Preparation Blade • 1" Wide

IP WK6LN

$19.00

The narrow profile blades provide better clearance when working closely against pinchwelds, roof panels, A-pillars, and trim.

BTB Narrow "Winged" Anti-Scratch Pinchweld Preparation Blade • 3/4" Wide

IP WK6MN

$19.00

The narrow profile blades provide better clearance when working closely against pinchwelds, roof panels, A-pillars, and trim.

BTB Narrow "Winged" Anti-Scratch Pinchweld Preparation Blade • 9/16" Wide

IP WK6SN

$19.00

The narrow profile blades provide better clearance when working closely against pinchwelds, roof panels, A-pillars, and trim.

Extractor Narrow Blade 5 3/4"

IP EXT-BLDN

$23.50

Most Extractor blades are now made from stainless steel, and have been cut and tapered to our exacting, custom specifications. The blades offer excellent flexibility and strength. If used correctly, they should last 200 cut-outs or more. Many users report 300 - 400 cut-outs. For best results it is necessary to keep the blade sharp and use adequate water for lubrication. The blades are very easy to sharpen. Simply run across a wet belt sander, grinder or file, putting a 45 degree edge on one side of the blade, in the same manner as you would sharpen a chisel.

Extractor Delta Blade 6 3/4"

IP EXT-DELTA-L

$28.50

Most Extractor blades are now made from stainless steel, and have been cut and tapered to our exacting, custom specifications. The blades offer excellent flexibility and strength. If used correctly, they should last 200 cut-outs or more. Many users report 300 - 400 cut-outs. For best results it is necessary to keep the blade sharp and use adequate water for lubrication. The blades are very easy to sharpen. Simply run across a wet belt sander, grinder or file, putting a 45 degree edge on one side of the blade, in the same manner as you would sharpen a chisel.

Rain Sensor Level

IP RSL330

$29.00

Rain Sensor Level helps prevent spillovers by providing a perfectly level surface, creating a flawlessly even rain sensor pad, using SensorTack products GEL902 & GEL904. Using the side knobs, adjust the rain sensor platform until the bubble in the level is centered. Then apply your gel to the rain sensor pad for a perfectly even application.

Protect-A-Dash™

IP CU1077

$30.00

This clear dash protector provides protection for the A-pillar trim and the headliner while using our cut-out tools.

Extractor Delta Blade 7 3/4"

IP EXt-DELTA-XL

$32.50

Most Extractor blades are now made from stainless steel, and have been cut and tapered to our exacting, custom specifications. The blades offer excellent flexibility and strength. If used correctly, they should last 200 cut-outs or more. Many users report 300 - 400 cut-outs. For best results it is necessary to keep the blade sharp and use adequate water for lubrication. The blades are very easy to sharpen. Simply run across a wet belt sander, grinder or file, putting a 45 degree edge on one side of the blade, in the same manner as you would sharpen a chisel.

Extractor Narrow Blade 8"

IP EXT-BLDN-XL

$33.00

Most Extractor blades are now made from stainless steel, and have been cut and tapered to our exacting, custom specifications. The blades offer excellent flexibility and strength. If used correctly, they should last 200 cut-outs or more. Many users report 300 - 400 cut-outs. For best results it is necessary to keep the blade sharp and use adequate water for lubrication. The blades are very easy to sharpen. Simply run across a wet belt sander, grinder or file, putting a 45 degree edge on one side of the blade, in the same manner as you would sharpen a chisel.

Terminator® Repair Hose

IP TRH716

$34.00

Hose and fittings for Terminator® repair system.

Extractor Narrow Blade 10"

IP EXT-BLDN-XXL

$35.00

Most Extractor blades are now made from stainless steel, and have been cut and tapered to our exacting, custom specifications. The blades offer excellent flexibility and strength. If used correctly, they should last 200 cut-outs or more. Many users report 300 - 400 cut-outs. For best results it is necessary to keep the blade sharp and use adequate water for lubrication. The blades are very easy to sharpen. Simply run across a wet belt sander, grinder or file, putting a 45 degree edge on one side of the blade, in the same manner as you would sharpen a chisel.

Extractor Delta Blade 9"

IP EXT-DELTA-XXL

$37.00

Most Extractor blades are now made from stainless steel, and have been cut and tapered to our exacting, custom specifications. The blades offer excellent flexibility and strength. If used correctly, they should last 200 cut-outs or more. Many users report 300 - 400 cut-outs. For best results it is necessary to keep the blade sharp and use adequate water for lubrication. The blades are very easy to sharpen. Simply run across a wet belt sander, grinder or file, putting a 45 degree edge on one side of the blade, in the same manner as you would sharpen a chisel.

Universal Battery Strap

IP EXT-STRAPKIT-V28

$39.00

Velcro, anti-vibrating battery strap to hold battery in place.

1-1/2" UltraWiz® Cold Knife Blades • 10

IP PN1004

$40.00

PN1004 has a cutting area that is 1-1/2" long. We do not recommend using this blade for initial cuts. Use a shorter blade to make your first cut, then go back with this blade to make your final cut. Especially useful where urethane is very wide, such as corners and along the bottom.

Original Thickness.

Package of ten.

Extractor Delta Blade 10"

IP EXT-DELTA-XXXL

$40.00

Most Extractor blades are now made from stainless steel, and have been cut and tapered to our exacting, custom specifications. The blades offer excellent flexibility and strength. If used correctly, they should last 200 cut-outs or more. Many users report 300 - 400 cut-outs. For best results it is necessary to keep the blade sharp and use adequate water for lubrication. The blades are very easy to sharpen. Simply run across a wet belt sander, grinder or file, putting a 45 degree edge on one side of the blade, in the same manner as you would sharpen a chisel.

Bullet™ Blade 3” W x 10”

IP REB262

$42.00

Bullet™ Blades are elongated, rounded blades designed to cut from all angles. Their unique shape and sharpening make side-to-side cutting easier and make slicing through wide beads of urethane a breeze.

3" W x 10” 

Bullet™ Blade 3” W x 14” L

IP REE264

$42.00

Bullet™ Blades are elongated, rounded blades designed to cut from all angles. Their unique shape and sharpening make side-to-side cutting easier and make slicing through wide beads of urethane a breeze.

3” W x 14” L

Bullet™ Blade - 1-1/2” W x 12” L

IP REL261

$42.00

Bullet™ Blades are elongated, rounded blades designed to cut from all angles. Their unique shape and sharpening make side-to-side cutting easier and make slicing through wide beads of urethane a breeze.

1-1/2” W x 12” L

Bullet™ Blade • 3” W x 12” L

IP REL263

$42.00

Bullet™ Blades are elongated, rounded blades designed to cut from all angles. Their unique shape and sharpening make side-to-side cutting easier and make slicing through wide beads of urethane a breeze.

3” W x 12” 

Dash / Vent Covers

IP DC570

$43.00

Designed to provide coverage for the contour of the dash to avoid damage while working inside the vehicle and prevent objects from falling into the vents. These dash/vent protectors are made from a lightweight and flexible material and can be adjusted to fit from 34” up to 68”.

ZipKnife™ Long Knife • 12"

IP ZKLK34

$54.00

ZipKnife^™ Long Knives are made with an extremely thin utility knife bracket and are designed to enable quick blade replacements. The knife has no screws, levers, or devices thus lessening the chance of damaging a vehicle. Uses all standard utility knife blades.