Auto Glass Tools - Equalizer®

ZipKnife™ Long Knife • 20"

IP ZKLK36

$58.00

ZipKnife^™ Long Knives are made with an extremely thin utility knife bracket and are designed to enable quick blade replacements. The knife has no screws, levers, or devices thus lessening the chance of damaging a vehicle. Uses all standard utility knife blades.

• Thin blade holder for hard-to-reach areas

• Quick blade change design

Terminator® Repair Charger

IP TRC719

$61.00

Charger for Terminator® repair system.

PUSH KNIFE • 12"

IP PUSH12

$68.00

Push Knife is a machined aluminum hand tool designed to remove quarter glasses utilizing Equalizer® Express® Blades. Push Knife features a hinged plate and blade clamp screw that locks the blade in place.

Available in 2 additional sizes!

ZipKnife™ Long Knife • 24"

IP ZKLK38

$81.00

ZipKnife^™ Long Knives are made with an extremely thin utility knife bracket and are designed to enable quick blade replacements. The knife has no screws, levers, or devices thus lessening the chance of damaging a vehicle. Uses all standard utility knife blades.

Equalizer® Visual Vacuum Plunger Cup

IP JVC192

$83.00

The most common thing you hear about vacuum cups amongst technicians is that they do not trust them. Well, you can trust these. The Equalizer® Visual Vacuum Plunger Cups are big: at 7" in diameter and each vacuum cup is rated at 90 pounds of lifting capacity. The handles are made of cast aluminum and are attached to the cup by high tensile strength bolts. All of that is great but most important of all is the highly visible pump vacuum ring. As you pump the plunger to create the vacuum seal the red line disappears and, it warns you that it is losing pressure when it reappears. Unlike many vacuums these are made for curved glass - yes there is a difference between a flat glass vacuum and a curved glass vacuum.

Rivet Setting Tool

IP ERT470

$85.00

This pop rivet setting tool comes with five common size end caps. The nosepiece is 5-1/2" long for reaching deep inside any door. A small plastic bottle between the handles catches shanks from the pop rivet, keeping your client's car clean and preventing accidental tire damage.

Included is an extra pair of jaws and wrench.

PUSH KNIFE • 24"

IP PUSH24

$86.00

PUSH KNIFE is a machined aluminum hand tool designed to remove quarter glasses utilizing Equalizer® Express® Blades. PUSH KNIFE features a rectangular plate for striking with a rubber mallet, enabling power from the mallet to be transferred to the blade and through the urethane.

Equalizer® Express® blades can be easily changed out by unscrewing the hinged plate that locks the blade in place.

Available in 2 additional sizes!

ZipKnife™ Cold Knife

IP ZK35

$92.00

ZipKnife^™ Cold Knife has a unique design that allows you to maintain a high level of control at the cutting head, giving you the freedom to move unencumbered while exerting pressure in both cutting directions.

Uses all standard cold knife blades.

BTB Narrow "Winged" Anti-Scratch Pinchweld Preparation

IP WK6NKIT

$92.00

The narrow profile blades provide better clearance when working closely against pinchwelds, roof panels, A-pillars, and trim. Featuring winged edges to prevent scratching and damage to the paint and body. An easily sharpened, sturdy design made to last. Stored in a roll-up, canvas bag.

Set Includes 3-Narrow "Winged" blades (1/2", 3/4" and 1"), one 1-9/16" wide prep blade, 1-WK7 handle,1-hex key, and carry case. 

PUSH KNIFE • 36"

IP PUSH36

$97.00

Push Knife is a machined aluminum hand tool designed to remove quarter glasses utilizing Equalizer® Express® Blades. Push Knife features a hinged plate and blade clamp screw that locks the blade in place.

Available in 2 additional sizes!

ZipKnife™ Compact Cold Knife

IP ZK45

$103.00

ZipKnife^™ Compact Cold Knife is designed to cut urethane in hard-to-reach areas like quarter glasses or vent glasses and is perfect for labor-intensive removals in areas around racks, cab-over camper shells, and decklids. Uses all standard cold knife blades.

The Auto Glass Setting Device

IP HST212

$145.00

You can easily install a windshield by yourself without worrying about setting it properly with the Auto Glass Setting Device.

To use: Place the setting device over the windshield wiper post on the bottom of the windshield opening (or a non-skid pad that can be placed on the body when setting back glasses). The top end of the setting device is held above the vehicle with a non-skid rubber pad that keeps it elevated. Set the opposite side of the glass from the setting device. Then when you are ready to set the side of the glass the device is being used on, slightly lift and remove the device to set.

Made in the USA.

ZipKnife™ Set

IP ZKS47

$145.00

Set includes 1 of Each; ZK45 ZipKnife^™ Compact Cold Knife and the ZKLK34 12" ZipKnife^™ Long Knife.

ZipKnife™ Set

IP ZKS37

$148.00

Set includes 1 of Each; ZK35 ZipKnife^™ Cold Knife and the ZKLK36 20" ZipKnife^™ Long Knife.

ZipKnife^™ Cold Knife has a unique radius that allows you to maintain a high level of control of the cutting head while permitting you freedom of movement exerting pressure in both cutting directions. Uses all standard cold knife blades.

ZipKnife^™ Long Knife is made with an extremely thin utility knife bracket and features a quick blade replacement design. The knives have no screws, levers, or devices lessening the chance of damaging a vehicle. Uses all standard utility knife blades.

BMW Door Wrench

IP DW400

$149.00

This specialty tool allows you to remove, replace and adjust frameless door glass on vehicles. Designed to work on BMW coupes and convertibles, mini coopers and most vehicles with frameless door glass. For use with: 6 Series Convertible/Coupe, 2 Series Convertible/Coupe, 4 Series Convertible/Coupe, 3 Series Gran Turismo, 4 Series Gran Coupe, M4 Convertible/Coupe, i3