Auto Glass Tools - Equalizer®

Flexible Cold Knife Pull Handle

IP RH161

$9.00

Made of stainless steel and aluminum, this is the same pull handle that comes on the GK380, SCN427, EQR423, and EQK425. It will also fit the CTK382, UCH319, and UCC320. Recently improved with a thicker, stronger attachment to the screw.

Made in the USA.

White Plastic Part for Paint Protector Arm

IP WK11SPS

$9.85

The paint protector arm is intended to be used with the power tool. It gives extra protection against scratching the paint and is especially useful when going around corners. This is the white plastic part only.

UltraWiz® UltraOne Cold Knife Pull Handle

IP 3005RC

$10.00

Replacement pull handle for UltraWiz® UltraOne Cold Knife (3005K).

Equalizer® Cutting Lubricant

IP ECL784

$10.00

Using our lubricant improves cutting action and reduces drag on the blade. It will not damage the dash or headliner. Mix at a 16 to 1 ratio (16 parts water to 1 part cutting lubricant) to make 128 ounces of cutting lubricant. The ECL784 contains no dyes, fragrances or VOC’s so that means when you spray the product in a hot car, it won’t take your breath away! Also, it evaporates slower providing a longer lubricating period.

Made in the USA.

8 Oz Bottle.

12" Standard Blade

IP EEB797

$10.00

All Equalizer® Blades have the correct Rockwell hardness so they will not buckle inside the sheath. The serrated style is sharpened with a unique double-serration method. Each serration is also serrated which gives a smoother and faster-cutting action. These blades will fit any Equalizer® tool, including the Excalibur® which is still available as well as the discontinued Equalizer® GT, Equalizer® Magnum, Magnum XP, Thor™, Equalizer® 12V, Equalizer® Freedom and LiveWire™. They will not fit the Equalizer® Express® auto glass cut-out knives. Use of any blades other than Equalizer® Blades will damage your tool and void your warranty.

Also available in 4" and 8" sizes.

Invented by: Ray Asbery

Made of Spring Steel 

Ninja Blade • 1"

IP ENO841

$10.00

Ninja™ Blades are designed especially for Ninja™ and withstand the power produced by the oscillating motion of the air tool. The reverse sharpened blade is perfect for cutting close to the pinchweld while cutting urethane on difficult to remove back glasses.

Made of hardened spring steel.

Ninja Blade • 3/4"

IP ENT840

$10.00

Ninja™ Blades are designed especially for Ninja™ and withstand the power produced by the oscillating motion of the air tool. The reverse sharpened blade is perfect for cutting close to the pinchweld while cutting urethane on difficult to remove back glasses.

Made of hardened spring steel.

8" Serrated Blade

IP ESB1308

$10.00

Invented by: Ray Asbery

All Equalizer® Blades have the correct Rockwell hardness so they will not buckle inside the sheath. The serrated style is sharpened with a unique double-serration method. Each serration is also serrated which gives a smoother and faster-cutting action. These blades will fit any Equalizer® tool, including the Excalibur® which is still available as well as the discontinued Equalizer® GT, Equalizer® Magnum, Magnum XP, Thor™, Equalizer® 12V, Equalizer® Freedom and LiveWire™. They will not fit the Equalizer® Express® auto glass cut-out knives. Use of any blades other than Equalizer® Blades will damage your tool and void your warranty.

Also available in 4" and 12" sizes.

Made in of spring steel in the USA.

Ricochet™ Pinchweld Protector • 48"

IP PFE820

$10.00

Replacement 48" Pinchweld Protector for Equalizer® Ricochet™ Pinchweld Protection System (PHV859).

RipCord™ HD Sample Roll

IP RCH25

$10.00

Sample Roll of RipCord™ HD

25 Ft.

Super Lube® Sheath Lubricant

IP SLL347

$10.00

This is a high-heat grease made for lubricating the inside of the sheath where contact with the blade sometimes can occur. This contact usually happens when a blade must curve in order to ride against the glass. This curving of the blade pushes it against the sheath and causes wear on both the blade and sheath if no lubricant is used. Using a small amount of our Super Lube® Sheath Lubricant on the inside of the sheath will extend the life of your sheath. This clear, non-toxic formula protects in temperatures ranging from -45°F to + 450°F and its effectiveness will not be reduced by cutting lubricant or water. 3 Oz.

TightWire™ • 164'

IP TWF164

$10.00

Composed of three super-strong stainless steel wires, braided to form a cable. When it is pulled the braided material cuts with a sawing action.

TightWire™ diameter measures .22 mm and measure 164' (50m) long.

Reverse Ground Ninja™ Blade • 1"

IP URO887

$10.00

Ninja™ blades are made especially for the Ninja™ tool and designed to withstand the power produced by the back and forth motion of the air tool. The Reverse Sharpened blades are perfect for cutting out those difficult to remove back glasses or anytime you want to cut close to the pinchweld.

All are made of hardened spring steel.

Reverse Ground Powered Cold Knife Blade • 3/4"

IP 51841

$11.00

These blades are the same as 51847, 51848, and 51849, but with one very important difference; they are ground in the reverse direction from regular cold knife blades. Some, very difficult to remove, back glasses can be cut out with a powered cold knife blade, but it must be sharpened in this reverse direction. Perfect for any time you want to cut close to the pinchweld.

These blades will fit the Falcon, Raven, and TimeSaver tools as well as most oscillating tools in the market.

Will not fit the Ninja™ line of tools.

Talon™ Oscillating Powered Cold Knife Blade • 3/4"

IP 51847

$11.00

Our standard sharpened blades are made of hardened carbon steel and are bent the same way regular cold knife blades are. They cut urethane either by thrusting forward into the urethane or backward into the urethane as you move the oscillating tool.

These blades will fit the Falcon, Raven, and TimeSaver tools as well as most oscillating tools in the market.

Will not fit the Ninja™ line of tools.