Auto Glass Tools - Equalizer®

1-1/2" UltraWiz® Cold Knife Blades • 10

IP PN1004

$40.00

PN1004 has a cutting area that is 1-1/2" long. We do not recommend using this blade for initial cuts. Use a shorter blade to make your first cut, then go back with this blade to make your final cut. Especially useful where urethane is very wide, such as corners and along the bottom.

Original Thickness.

Package of ten.

12 Volt UV LED Lamp

IP GKL868

$187.00

Equalizer® 12 volt UV LED Lamp

BlackHawk™ 20-Volt Tool

IP BH2019

$841.00

BlackHawk™ has a heavy-duty, 20-Amp brushless motor to provide ample power for quickly removing the most difficult glass. It’s compact and lightweight design allows for maneuvering tight areas and features a bright LED light to provide visibility in dark work areas.

BMW Door Wrench

IP DW400

$149.00

This specialty tool allows you to remove, replace and adjust frameless door glass on vehicles. Designed to work on BMW coupes and convertibles, mini coopers and most vehicles with frameless door glass. For use with: 6 Series Convertible/Coupe, 2 Series Convertible/Coupe, 4 Series Convertible/Coupe, 3 Series Gran Turismo, 4 Series Gran Coupe, M4 Convertible/Coupe, i3

BTB Narrow "Winged" Anti-Scratch Pinchweld Preparation

IP WK6NKIT

$92.00

The narrow profile blades provide better clearance when working closely against pinchwelds, roof panels, A-pillars, and trim. Featuring winged edges to prevent scratching and damage to the paint and body. An easily sharpened, sturdy design made to last. Stored in a roll-up, canvas bag.

Set Includes 3-Narrow "Winged" blades (1/2", 3/4" and 1"), one 1-9/16" wide prep blade, 1-WK7 handle,1-hex key, and carry case. 

BTB Narrow "Winged" Anti-Scratch Pinchweld Preparation Blade • 1" Wide

IP WK6LN

$19.00

The narrow profile blades provide better clearance when working closely against pinchwelds, roof panels, A-pillars, and trim.

BTB Narrow "Winged" Anti-Scratch Pinchweld Preparation Blade • 1-9/16" Wide

IP WK640N

$16.00

The narrow profile blades provide better clearance when working closely against pinchwelds, roof panels, A-pillars, and trim.

BTB Narrow "Winged" Anti-Scratch Pinchweld Preparation Blade • 3/4" Wide

IP WK6MN

$19.00

The narrow profile blades provide better clearance when working closely against pinchwelds, roof panels, A-pillars, and trim.

BTB Narrow "Winged" Anti-Scratch Pinchweld Preparation Blade • 9/16" Wide

IP WK6SN

$19.00

The narrow profile blades provide better clearance when working closely against pinchwelds, roof panels, A-pillars, and trim.

Bullet™ Blade - 1-1/2” W x 12” L

IP REL261

$42.00

Bullet™ Blades are elongated, rounded blades designed to cut from all angles. Their unique shape and sharpening make side-to-side cutting easier and make slicing through wide beads of urethane a breeze.

1-1/2” W x 12” L

Bullet™ Blade • 3” W x 12” L

IP REL263

$42.00

Bullet™ Blades are elongated, rounded blades designed to cut from all angles. Their unique shape and sharpening make side-to-side cutting easier and make slicing through wide beads of urethane a breeze.

3” W x 12” 

Bullet™ Blade 3” W x 10”

IP REB262

$42.00

Bullet™ Blades are elongated, rounded blades designed to cut from all angles. Their unique shape and sharpening make side-to-side cutting easier and make slicing through wide beads of urethane a breeze.

3" W x 10” 

Bullet™ Blade 3” W x 14” L

IP REE264

$42.00

Bullet™ Blades are elongated, rounded blades designed to cut from all angles. Their unique shape and sharpening make side-to-side cutting easier and make slicing through wide beads of urethane a breeze.

3” W x 14” L

Classic Tool Kit

IP CK1965

$155.00

1 • LGM207 • Locking Strip Tool
1 • RTL895 • Long Rubber Hook Tool
1 • RT753 • Short Rubber Hook Tool
1 • MR747 • Moulding Release Tool
1 • BDA251 • Footloose™ Gasket Tool
1 • RGL34 • Self-Locking Rubber Gasket Tool 1 • RGC751 • Rubber Gasket Cleaner
1 • RT752 • Rope Insert Tool
1 • LS758 • Swivel Tip Locking Strip Tool
1 • DZ623 • MultiSpanner™

Dash / Vent Covers

IP DC570

$43.00

Designed to provide coverage for the contour of the dash to avoid damage while working inside the vehicle and prevent objects from falling into the vents. These dash/vent protectors are made from a lightweight and flexible material and can be adjusted to fit from 34” up to 68”.

Door Panel Removal Tool

IP DCR244

$10.00

General purpose door panel removal tool.

Made of hardened steel.

Equalizer® Ambush™

IP ATV2012

$841.00

Equalizer® Flip-Top Magnetic Screwdriver 11"

IP EMS766

$15.00

Comes with six bits: #1, #2, #3 Phillips and #3, #5, #8 slotted, stored in the flip-cap handle.

Equalizer® JetPack™ • Single Cup

IP JP135

$351.00

Equalizer® JetPack'" vacuum cups were designed from the ground-up to eliminate the need for manual pumping. Turn on the JetPack'", place them on the glass and let them handle the pumping. If the cup loses vacuum, AIR FORCE'" vacuum technology takes over and keeps that crucial suction going until the cup has maximum vacuum again. Equalizer® JetPack™ has a 7" diameter cup with a maximum safe working load of 100lbs/45kg. JetPack™ will fully charge in about two hours and come with a 120-volt charger.

Equalizer® JetPack™ • Pair

IP JP140

$790.00

Equalizer® JetPack'" vacuum cups are designed from the ground-up to eliminate the need for manual pumping. Turn on the JetPack™, place them on the glass, and let them handle the pumping. If the cup loses vacuum, AIR FORCE™ vacuum technology takes over and keeps that crucial suction going until the cup has maximum vacuum again. Each Equalizer® JetPack™ has a 7" diameter cup with a maximum safe working load of 100lbs/45kg. JetPack™ will fully charge in about two hours and come with a 120-volt charger.

Equalizer® Terminator® Windshield Repair System

IP TSK710

$2700.00

Terminator® features an automatic pressure/vacuum process for windshield repair. Throughout the process the operator does not stay on the repair, the machine does the work for you. To begin, you select a program, and then Terminator machine will alternate pressure/vacuum cycles according to your selection. 

Kit contains Terminator unit, 1 hose, 1 UV curing light, bridge and injector assembly, 1 battery, 1 charger, 1 protect-a-dash, 25 razor blades, 1 mini scraper single, 20 mylar squares, 1oz. cleaning solution, 1 cleaning brush, LED flashlight, .5 oz. medium viscosity resin, .5 oz. pit filler resin, 1 oz. pit polish, .5 oz. thin viscosity resin, 1 probe, 1 mirror, 1 UV shield, 1 cleaning brush, and 1 6” long guide pin, UV screen.

Equalizer® Visual Vacuum Plunger Cup

IP JVC192

$83.00

The most common thing you hear about vacuum cups amongst technicians is that they do not trust them. Well, you can trust these. The Equalizer® Visual Vacuum Plunger Cups are big: at 7" in diameter and each vacuum cup is rated at 90 pounds of lifting capacity. The handles are made of cast aluminum and are attached to the cup by high tensile strength bolts. All of that is great but most important of all is the highly visible pump vacuum ring. As you pump the plunger to create the vacuum seal the red line disappears and, it warns you that it is losing pressure when it reappears. Unlike many vacuums these are made for curved glass - yes there is a difference between a flat glass vacuum and a curved glass vacuum.

Equalizer® Visual Vacuum Plunger Cups • 2

IP JVT193

$157.00

Today, you see more technicians using vacuum cups to set a windshield than you saw just a few years ago. The most common thing you hear about vacuum cups amongst technicians is that they do not trust them. Well, you can trust these. The Equalizer® Windshield Setting Cups are big: at 7” in diameter and each vacuum cup is rated at 90 pounds of lifting capacity. The handles are made of cast aluminum and are attached to the cup by high tensile strength bolts. All of that is great but most important of all is the highly visible pump vacuum ring. As you pump the plunger to create the vacuum seal the red line disappears and, it warns you that it is losing pressure when it reappears. Unlike many vacuums these are made for curved glass - yes there is a difference between a flat glass vacuum and a curved glass vacuum.

Extractor 180° Swivel Shaft Extentsion

IP EXT-SHD7-SWIVEL

$159.00

The Swivel Shaft is a 7” extended shaft, which gives longer reach in tight cutout areas.It swivels 90 degrees left & right, allowing the technician to swivel his battery or handle out of the way of
obstacles when cutting out glass. This product fits all cordless and electric Extractors models.

Extractor 28V Kit

IP EXT-PROV28

$1099.00

For rugged performance and unbeatable strength, look no further than the heavy duty EXT- PROV28. This proven and always reliable Milwaukee Extractor is powered by 28 volt lithium-ion batteries that deliver unsurpassed power and incredible run time.

INCLUDED WITH THE KIT:

• 2 28 volt lithium batteries, rated at 3.0 amp hours each*
• 120v battery charger
• 2 delta blades
• plastic tool box/carry case
• safety glasses
• spray bottle.

*Additional batteries available for purchase.

Extractor Delta Blade 10"

IP EXT-DELTA-XXXL

$40.00

Most Extractor blades are now made from stainless steel, and have been cut and tapered to our exacting, custom specifications. The blades offer excellent flexibility and strength. If used correctly, they should last 200 cut-outs or more. Many users report 300 - 400 cut-outs. For best results it is necessary to keep the blade sharp and use adequate water for lubrication. The blades are very easy to sharpen. Simply run across a wet belt sander, grinder or file, putting a 45 degree edge on one side of the blade, in the same manner as you would sharpen a chisel.

Extractor Delta Blade 6 3/4"

IP EXT-DELTA-L

$28.50

Most Extractor blades are now made from stainless steel, and have been cut and tapered to our exacting, custom specifications. The blades offer excellent flexibility and strength. If used correctly, they should last 200 cut-outs or more. Many users report 300 - 400 cut-outs. For best results it is necessary to keep the blade sharp and use adequate water for lubrication. The blades are very easy to sharpen. Simply run across a wet belt sander, grinder or file, putting a 45 degree edge on one side of the blade, in the same manner as you would sharpen a chisel.

Extractor Delta Blade 7 3/4"

IP EXt-DELTA-XL

$32.50

Most Extractor blades are now made from stainless steel, and have been cut and tapered to our exacting, custom specifications. The blades offer excellent flexibility and strength. If used correctly, they should last 200 cut-outs or more. Many users report 300 - 400 cut-outs. For best results it is necessary to keep the blade sharp and use adequate water for lubrication. The blades are very easy to sharpen. Simply run across a wet belt sander, grinder or file, putting a 45 degree edge on one side of the blade, in the same manner as you would sharpen a chisel.

Extractor Delta Blade 9"

IP EXT-DELTA-XXL

$37.00

Most Extractor blades are now made from stainless steel, and have been cut and tapered to our exacting, custom specifications. The blades offer excellent flexibility and strength. If used correctly, they should last 200 cut-outs or more. Many users report 300 - 400 cut-outs. For best results it is necessary to keep the blade sharp and use adequate water for lubrication. The blades are very easy to sharpen. Simply run across a wet belt sander, grinder or file, putting a 45 degree edge on one side of the blade, in the same manner as you would sharpen a chisel.

Extractor Lightning

IP EXT-PRO-V120

$439.00

Delivering over 3000 strokes per minute, the all-new EXT-PRO-V120 “LIGHTNING” will quickly power its way through even the toughest of auto glass removals. The variable speed trigger gives you the utmost control, allowing you to complete any task safely and efficiently.

*The EXT-PRO-V120 basic kit now includes our full size plastic tool box / carry case.

THE LIGHTNING KIT INCLUDES:

• 1 delta blade
• 1 pair of safety glasses
• plastic tool box / carry case
• one year warranty