Backfill Removal Blades Many buses and large vehicles use flush glazing, meaning the different sections of glass down the side of the vehicle are set about 1/4" to 3/8" apart and the space between is filled with urethane. Backfill Removal Blades will remove this urethane quickly and easily. WK176 • 1/4" Blade Channel Width WK174 • 5/32" (slightly larger than 1/8") Blade Channel Width WK26 • Cutting Depth Control Arm
Backfill Removal Blades Many buses and large vehicles use flush glazing, meaning the different sections of glass down the side of the vehicle are set about 1/4" to 3/8" apart and the space between is filled with urethane. Backfill Removal Blades will remove this urethane quickly and easily. WK176 • 1/4" Blade Channel Width WK174 • 5/32" (slightly larger than 1/8") Blade Channel Width WK26 • Cutting Depth Control Arm
This depth control arm has a thin 1/32" wheel and is intended to be used over the Yellow WK3, WK4, & “Z” blades. The wheel rolls smoothly along uneven (in & out) urethane surfaces. WK11AW
This depth control arm has a large plastic wheel that rolls along the A-pillar trim, soft headliner or vehicle body panel. It is intended to be used over the Yellow WK3, WK4, & “Z” blades. WK11BW5
This depth control arm with a 1/32" wide wheel on each end spaces the blade away from the encapsulated glass and is designed to roll smoothly along uneven (in & out) urethane surfaces. The arm provides support for the Orange reverse blades to avoid any blade flapping or shaking. Use the long offset end under the Orange WK4RS blade. Use the short end under the Orange WK4ZRS & WK24ZRS blades. WK11CW
This depth control arm is made with a large plastic wheel and intended for use under blades WK5 & WK5S when removing backfill from the glass edge (buses & trains). In this application, the wheel rolls along the glass. It is also used over other flat blades such as WK2S to control cutting depth for longer reach cutting applications. When used in this application the wheel rolls along the window glass or vehicle body trim.
This is a long depth control arm with a thin 1/32" wheel designed to roll smoothly along uneven (in & out) urethane surfaces. It is intended for use over WK1 & WK1S long blades for excellent control on blade-cutting depth where a long reach below deep dashboards is necessary. WK11EW
This depth control arm has a thin 1/32" wheel on each end designed to roll smoothly along uneven (in & out) urethane surfaces and encapsulated moulding. Use the long offset end over the Yellow WK2, WK2S, WK24 & WK24S blades or under the Orange WK24RS blade for encapsulated glass removal. Use the short offset end over Yellow WK3 & WK4 blades or under the Orange WK4RS blade for encapsulated glass removal. WK11FW
The BTB E-Tool system is small, powerful, lightweight, and portable. It has a smooth cutting action and uses a variety of blades for removing the glass, moldings, emblems, and body panels. This tool runs on a 12-Volt battery pack that comes in a handy carrying bag with a strap.
Flexible Removal Blade Designed with a long reach to follow the curve of the glass where the urethane is located. WK24 • 9-1/2" Flexible Blade WK24S • 9-1/2" Serrated Flexible Blade
