Equalizer

sort by:
view:

Cold Knife with Red Cover & 1.5" Blade

IP CK304

$29.00

Paint jobs have become more intricate with anywhere from three to seven layers of paint being applied.

If you damage the paint you are in trouble!

To help prevent body damage, Equalizer® has added a soft, Neoprene cover to our GK380 Standard Cold Knife. Additionally, it gives the cold knife a comfortable and soft, non-slip grip.

The covered wire on the pull handle prevents damage to the hood, vertical posts, and other painted parts.

Compact C-Clip Remover

IP JCS452

$8.00

This Compact C-clip remover has a flat design that will let you use it from all sides.  

Course Diamond File

IP LTB275

$11.00

Our Diamond Files are made of monocrystalline diamonds and their strong, single-crystal structure does not break apart with use. If you want to use a lubricant, use only water. To clean them just scrub with a bristle brush and dishwashing soap. The red file is fine and will put a razor edge on your cutting tools. The blue file is coarse and will sharpen blades like a normal file. Total length is 7" long and the file area measures 2-1/2" long which takes up very little room in your toolbox.

Cowling Clip Removal Tool

IP CCR819

$36.00

This tool has a small, sharp auger that bites into the plastic head of an expansion-type cowling clip and makes pulling the plastic head possible. The clip will then collapses and can easily be removed. 

Curved Door Upholstery Remover

IP PH1355

$14.00

Designed for removing plastic or metal fasteners in confined places, it works great on the front part of the door where the door jam will often interfere with the removal of the door panel.

To use, place the notch in the tool over the fastener and pry the fastener out of the hole.

Dash Protector

IP BDP1078

$64.00

Dash Protector provides protection for the a-pillar trim and the headliner while using our cut-out tools in addition to the dash.

Door Panel & Cowling Clip Removal Tools

IP CRT250

$53.00

Equalizer™ door panel & cowling clip removal tools are made with different size openings that grab and hold clips. Made in different lengths and configurations so you can place them behind the door panel into hard to reach recessed clips.

Made of the highest quality, heat-treated stainless steel. 

Set of five tools.

Door Panel Removal Tool

IP DCR244

$10.00

General purpose door panel removal tool.

Made of hardened steel.

Door Upholstery Remover

IP DUR748

$12.00

Our Door Upholstery Remover is for removing plastic or metal fasteners. It is made of hardened steel with a large, comfortable handle. 

To use, place the tool under the edge of the door upholstery panel and insert it into the fastener as far as possible, then simply pry up.

Door Upholstery Remover

IP SCR696

$31.00

Features a tapered front to easily fit under all types of clips. Especially great for removing door panels.

To use, spread the jaws slightly so they will go under and around the clip. Then, close the jaws and the tool removes the clip without damage to the clip. 

Made in the USA. 

Double-Direction Moulding Release Tool

IP IW1214

$7.00

Our Double-Direction Moulding Release Tool is made of hardened steel and has been an industry standard for over 50 years.

Double-End Moulding Release Tool

IP DEC381

$7.00

This tool has a small rubber spacer at each end to keep the tool above the glass by about 1/32" preventing the tool from scratching the glass. It also holds the tool end above the glass, lessening the chance of the tip catching the edge of the glass and breaking it. Made of steel.

EasyPunch™

IP AEP1132

$30.00

Equalizer® EasyPunch™ is designed to remove rivet stems with the hammering device built into the EasyPunch™, which is delivered with a simple push on the handle. Eliminates the need for hammering. Not for use on steel rivets.  

When removing door glasses that are held in place by pop rivets you must drill the rivets out. Before you can drill the rivets out, however, you need to remove the rivet stems. To use, simply push on the handle. When depressed 1/2 inch, the spring-loaded punch releases, delivering enough force on the rivet stem that it begins to back out. After a quick series of punches, the stem is removed and you can begin to drill. 

Economy Cold Knife

IP CTK382

$21.00

This affordable cold knife has a stainless steel pull cable with a fused end flute and a large, easy-to-grasp aluminum pull handle that is virtually indestructible.

5" Long and comes with one Z4 Blade.  

Equalizer® Ambush™

IP ATV2012

$841.00

The Equalizer® Ambush is designed to cut through the toughest urethane. A heavy-duty 20-Volt motor provides the power to quickly remove the most difficult glass with the convenience of the battery. It has a rubber over molded comfort grip and a quick release blade clamp.

Kit Includes one of each of the following;

20-Volt Li-Ion Battery, 20-Volt Battery Charger, BFE1400 Blade, Safety Glasses, Carrying Case, and Instructional DVD.