Glass Removal Start-Up Kit

IP GRK687

$1025.00

Includes the Viper™ Wire Removal System
With the trend in automobiles moving to exposed edge glass and having small, hard to maneuver quarter glasses and sliders, we felt we needed a starter kit that included a wire removal tool to safely get in these areas and remove the glass without damaging the vehicle. That’s how we came up with our new Glass Removal Start-Up Kit. It comes with everything a new technician will need to remove auto glass and prep the area for replacement. This includes the Viper™ Wire Removal System as well as many other industry-specific tools. This kit is intended to build on a basic set of tools that most people into the auto glass in already have and make it into a set of tools for an Auto Glass Technician.

Kit Contents-

1 • VIP1138 • Equalizer® Viper™ Wire Removal Kit
1 • SKE291 • PrepMaster Kit
1 • NPD221 • BLOWHARD™
1 • FSG130 • Clear Safety Glasses
1 • GBM446 • PryBaby™ Tool Set
1 • HTS923 • Hook & Pick Set
2 • IS742 • Standard Windshield Stick
2 • ISC741 • Windshield Stick Chisel End
1 • MB743 • Mirror Bracket Wrench (Torx®)
1 • MBR600 • Equalizer® Mirror Torx® Wrench
1 • MR747 • Moulding Release Tool
1 • RT753 • Hook Tool
1 • TPE657 • Cowling Clip Removal Tool
1 • VTP586 • Paint Protector
1 • BNQ271 • Cold Knife
1 • ALK230 • Adjustable Length Cutting Knife
1 • HRT367 • Hose Removal Pliers
1 • JFT323 • Equalizer® LongHorn Seat Release
1 • WP534E • Wiper Puller
1 • VZB10 • Z Blades Variety Pack (9)
1 • 98027 • Metric Folding Hex Wrenches
1 • 98057 • Torx® Folding Wrenches
1 • RB497 • Razor Blades (sleeve of 100)
1 • RMI309 • Rearview Mirror Installer
1 • TCR370 • Toyota/Honda Clip Remover
1 • UKB498 • Utility Knife Blades (Pkg of 100)
1 • DUR748 • Door Upholstery Remover

Raptor™ Tool

IP F22

$766.00

Raptor is powerful, small, light, and easy to maneuver on all types of auto glass.

Equalizer® Raptor is a cord and wire auto glass removal device designed from the ground-up to dramatically improve the power of the vacuum cup with the integration of our AirForce^™ Constant Vacuum Cups. This technology has been specifically developed by Equalizer^® to create a quick placement and constant vacuum to the glass so the Raptor^™ stays in place and resists sliding.

FEATURES

• AirForce Technology
• Low Profile Design
• No Pumping Required
• Long Battery Life
• Quick Charging

This item includes only the tool without accessories. 

Idea by: Dan Avery   

Raptor™ Deluxe Kit

IP F22KIT

$999.00

Raptor is powerful, small, light, and easy to maneuver on all types of auto glass.

Equalizer® Raptor is a cord and wire auto glass removal device designed from the ground-up to dramatically improve the power of the vacuum cup with the integration of our AirForce^™ Constant Vacuum Cups. This technology has been specifically developed by Equalizer^® to create a quick placement and constant vacuum to the glass so the Raptor^™ stays in place and resists sliding.

FEATURES

• AirForce Technology
• Low Profile Design
• No Pumping Required
• Long Battery Life
• Quick Charging

ZipKnife™ Long Knife Set

IP ZKS90

$173.00

ZipKnife™ Long Knives are made with an extremely thin utility knife bracket and a quick blade replacement design. The knives have no screws, levers or devices lessening the chance for damaging a vehicle. Uses all standard utility knife blades.

ZipKnife™ Cold Knife Set

IP ZKS80

$163.00

ZipKnife™ Cold Knife has a unique design that allows you to maintain a high level of control at the cutting head, giving you the freedom to move unencumbered while exerting pressure in both cutting directions.

Uses all standard cold knife blades.

Set includes 1-ZK35, Zipknife and 1-ZK45-Compact Zipknife. 

ZipKnife™ Long Knife • 12"

IP ZKLK34

$54.00

ZipKnife^™ Long Knives are made with an extremely thin utility knife bracket and are designed to enable quick blade replacements. The knife has no screws, levers, or devices thus lessening the chance of damaging a vehicle. Uses all standard utility knife blades.

ZipKnife™ Set

IP ZKS47

$145.00

Set includes 1 of Each; ZK45 ZipKnife^™ Compact Cold Knife and the ZKLK34 12" ZipKnife^™ Long Knife.

ZipKnife™ Cold Knife

IP ZK35

$92.00

ZipKnife^™ Cold Knife has a unique design that allows you to maintain a high level of control at the cutting head, giving you the freedom to move unencumbered while exerting pressure in both cutting directions.

Uses all standard cold knife blades.

ZipKnife™ Set

IP ZKS37

$148.00

Set includes 1 of Each; ZK35 ZipKnife^™ Cold Knife and the ZKLK36 20" ZipKnife^™ Long Knife.

ZipKnife^™ Cold Knife has a unique radius that allows you to maintain a high level of control of the cutting head while permitting you freedom of movement exerting pressure in both cutting directions. Uses all standard cold knife blades.

ZipKnife^™ Long Knife is made with an extremely thin utility knife bracket and features a quick blade replacement design. The knives have no screws, levers, or devices lessening the chance of damaging a vehicle. Uses all standard utility knife blades.

ZipKnife™ Long Knife • 20"

IP ZKLK36

$58.00

ZipKnife^™ Long Knives are made with an extremely thin utility knife bracket and are designed to enable quick blade replacements. The knife has no screws, levers, or devices thus lessening the chance of damaging a vehicle. Uses all standard utility knife blades.

• Thin blade holder for hard-to-reach areas

• Quick blade change design

ZipKnife™ Long Knife • 24"

IP ZKLK38

$81.00

ZipKnife^™ Long Knives are made with an extremely thin utility knife bracket and are designed to enable quick blade replacements. The knife has no screws, levers, or devices thus lessening the chance of damaging a vehicle. Uses all standard utility knife blades.

ZipKnife™ Compact Cold Knife

IP ZK45

$103.00

ZipKnife^™ Compact Cold Knife is designed to cut urethane in hard-to-reach areas like quarter glasses or vent glasses and is perfect for labor-intensive removals in areas around racks, cab-over camper shells, and decklids. Uses all standard cold knife blades.

PUSH KNIFE • 12"

IP PUSH12

$68.00

Push Knife is a machined aluminum hand tool designed to remove quarter glasses utilizing Equalizer® Express® Blades. Push Knife features a hinged plate and blade clamp screw that locks the blade in place.

Available in 2 additional sizes!

PUSH KNIFE • 24"

IP PUSH24

$86.00

PUSH KNIFE is a machined aluminum hand tool designed to remove quarter glasses utilizing Equalizer® Express® Blades. PUSH KNIFE features a rectangular plate for striking with a rubber mallet, enabling power from the mallet to be transferred to the blade and through the urethane.

Equalizer® Express® blades can be easily changed out by unscrewing the hinged plate that locks the blade in place.

Available in 2 additional sizes!

PUSH KNIFE • 36"

IP PUSH36

$97.00

Push Knife is a machined aluminum hand tool designed to remove quarter glasses utilizing Equalizer® Express® Blades. Push Knife features a hinged plate and blade clamp screw that locks the blade in place.

Available in 2 additional sizes!

Equalizer® JetPack™ • Single Cup

IP JP135

$351.00

Equalizer® JetPack'" vacuum cups were designed from the ground-up to eliminate the need for manual pumping. Turn on the JetPack'", place them on the glass and let them handle the pumping. If the cup loses vacuum, AIR FORCE'" vacuum technology takes over and keeps that crucial suction going until the cup has maximum vacuum again. Equalizer® JetPack™ has a 7" diameter cup with a maximum safe working load of 100lbs/45kg. JetPack™ will fully charge in about two hours and come with a 120-volt charger.

Equalizer® JetPack™ • Pair

IP JP140

$790.00

Equalizer® JetPack'" vacuum cups are designed from the ground-up to eliminate the need for manual pumping. Turn on the JetPack™, place them on the glass, and let them handle the pumping. If the cup loses vacuum, AIR FORCE™ vacuum technology takes over and keeps that crucial suction going until the cup has maximum vacuum again. Each Equalizer® JetPack™ has a 7" diameter cup with a maximum safe working load of 100lbs/45kg. JetPack™ will fully charge in about two hours and come with a 120-volt charger.

Equalizer® Terminator® Windshield Repair System

IP TSK710

$2700.00

Terminator® features an automatic pressure/vacuum process for windshield repair. Throughout the process the operator does not stay on the repair, the machine does the work for you. To begin, you select a program, and then Terminator machine will alternate pressure/vacuum cycles according to your selection. 

Kit contains Terminator unit, 1 hose, 1 UV curing light, bridge and injector assembly, 1 battery, 1 charger, 1 protect-a-dash, 25 razor blades, 1 mini scraper single, 20 mylar squares, 1oz. cleaning solution, 1 cleaning brush, LED flashlight, .5 oz. medium viscosity resin, .5 oz. pit filler resin, 1 oz. pit polish, .5 oz. thin viscosity resin, 1 probe, 1 mirror, 1 UV shield, 1 cleaning brush, and 1 6” long guide pin, UV screen.

Honda & Acura Cowling Clip • 10

IP 90602

$4.00

Honda & Acura Cowling Clips.

Works on 2008-Current

•    Honda Accord & Fit
•    Acura TSX and ZDX

Honda & Acura Moulding Clip • 5

IP 91570

$4.00

Honda & Acura Moulding Clips.

Works on 2009-2016

•     Honda Pilot and Odyssey
•     Acura ZDX and MDX

Fein® SuperCut Cordless Tool

IP AFSC17

$949.00

Fein^® SuperCut Cordless

 

Fein^® tools were introduced into the auto glass industry in the early 1980s and remain one of the most used auto glass removal tools in the world. Fein® has worked to refine their original design and today the Fein® SuperCut has a streamlined design, high power motor, and variable speed control. The tool is of the highest quality and uses ball and needle bearings together with a gearbox designed for continuous use and heavy loads.

Each AFSC17 kit includes 1-Fein® SuperCut Cordless, one blade tool, two rechargeable batteries, and a DVD users guide. Everything comes neatly packaged in a plastic carrying case.

BlackHawk™ 20-Volt Tool

IP BH2019

$841.00

BlackHawk™ has a heavy-duty, 20-Amp brushless motor to provide ample power for quickly removing the most difficult glass. It’s compact and lightweight design allows for maneuvering tight areas and features a bright LED light to provide visibility in dark work areas.

Classic Tool Kit

IP CK1965

$155.00

1 • LGM207 • Locking Strip Tool
1 • RTL895 • Long Rubber Hook Tool
1 • RT753 • Short Rubber Hook Tool
1 • MR747 • Moulding Release Tool
1 • BDA251 • Footloose™ Gasket Tool
1 • RGL34 • Self-Locking Rubber Gasket Tool 1 • RGC751 • Rubber Gasket Cleaner
1 • RT752 • Rope Insert Tool
1 • LS758 • Swivel Tip Locking Strip Tool
1 • DZ623 • MultiSpanner™

SafeLift™ Glass Setting Device

IP SL1000

$4130.00

Equalizer® SafeLift™ is a powered installation system that allows a technician to remove and install windshields, panoramic roofs, backlites, and even body panels without a second technician. SafeLift™ features a remote-controlled lifting operation that enables setting glass from either the left or right side of the vehicle and an innovative rotating glass stand. SafeLift™ provides technicians with full mobility without heavy lifting and strain. Made of light-weight aluminum for mobile or in-shop application.

Dash / Vent Covers

IP DC570

$43.00

Designed to provide coverage for the contour of the dash to avoid damage while working inside the vehicle and prevent objects from falling into the vents. These dash/vent protectors are made from a lightweight and flexible material and can be adjusted to fit from 34” up to 68”.

BMW Door Wrench

IP DW400

$149.00

This specialty tool allows you to remove, replace and adjust frameless door glass on vehicles. Designed to work on BMW coupes and convertibles, mini coopers and most vehicles with frameless door glass. For use with: 6 Series Convertible/Coupe, 2 Series Convertible/Coupe, 4 Series Convertible/Coupe, 3 Series Gran Turismo, 4 Series Gran Coupe, M4 Convertible/Coupe, i3

Equalizer® Flip-Top Magnetic Screwdriver 11"

IP EMS766

$15.00

Comes with six bits: #1, #2, #3 Phillips and #3, #5, #8 slotted, stored in the flip-cap handle.

Glass Removal Kit

IP GRK551

$1399.00

Kit Contents

1 • WK6SET BTB Winged Scraper Set •  HDK629 - Windshield Stand
•2 - IS742 Installation Sticks • 2 - ISC741 Chisel Point Installation Stick  • ULF481 - UltraSonic Leak Detector • VNT306 - Top Notch Tool • CS1075 - Nozzle Cutter • PKS102 - PushKnife Set (3 Sizes) • EHB145 - 1-1/2" x 10" HydroBlade • EHL187 - 3" x 12" HydroBlade • VZB10 - Z Blade Variety Pack • MCC153 - Milwaukee 18 Volt Combo Kit • MT228 - All-In-One Mirror Tool • RMI309 - Rearview Mirror Installer  • ZKS37 - ZipKnife Set • JVT193 - Pair of Visual Vacuum Cups

Glass Removal Kit with Ambush

IP GRK551-A

$1999.00

1 • WK6SET BTB Winged Scraper Set •  HDK629 - Windshield Stand
•2 - IS742 Installation Sticks • 2 - ISC741 Chisel Point Installation Stick  • ULF481 - UltraSonic Leak Detector • VNT306 - Top Notch Tool • CS1075 - Nozzle Cutter • PKS102 - PushKnife Set (3 Sizes) • EHB145 - 1-1/2" x 10" HydroBlade • EHL187 - 3" x 12" HydroBlade • VZB10 - Z Blade Variety Pack • MCC153 - Milwaukee 18 Volt Combo Kit • MT228 - All-In-One Mirror Tool • RMI309 - Rearview Mirror Installer  • ZKS37 - ZipKnife Set • JVT193 - Pair of Visual Vacuum Cups

Glass Removal Kit with BlackHawk™

IP GRK551-B

$1999.00

Kit Contents

1 • WK6SET BTB Winged Scraper Set •  HDK629 - Windshield Stand
•2 - IS742 Installation Sticks • 2 - ISC741 Chisel Point Installation Stick  • ULF481 - UltraSonic Leak Detector • VNT306 - Top Notch Tool • CS1075 - Nozzle Cutter • PKS102 - PushKnife Set (3 Sizes) • EHB145 - 1-1/2" x 10" HydroBlade • EHL187 - 3" x 12" HydroBlade • VZB10 - Z Blade Variety Pack • MCC153 - Milwaukee 18 Volt Combo Kit • MT228 - All-In-One Mirror Tool • RMI309 - Rearview Mirror Installer  • ZKS37 - ZipKnife Set • JVT193 - Pair of Visual Vacuum Cups

BlackHawk™