Python™ Wire Removal System

IP PWT1113

$999.00

Equalizer® Python™ is a rotating cord and wire removal system which uses a unique, directional suspension reel that allows for safe and effective glass removal. With just the rotation of the curved stainless steel slide bar, the cord and wire will cut through the toughest urethane with no resistance. 

Kit Includes one of Each; Python™ Cup Assembly, Slither™, Venom™ Wire Dispenser, T-Handle Centerstart™, Installation Stick, Clear Dash Protector, Wire Grabber Pliers & Cutter, Package of Guide Pins and 4-Rolls of Squire2™ Wire (A total of 656 feet) along with an Instructional DVD. All packaged in a heavy-duty plastic, foam lined case. 

Ninja Head Assembly

IP 3302

$64.57

Head assembly for Equalizer Ninja GT EGT149 & EGK150. Includes parts 3302, 2203, 2204, and 2205.

Please refer to schematic breakdown for part identification.

Super Lube® Sheath Lubricant

IP SLL347

$10.00

This is a high-heat grease made for lubricating the inside of the sheath where contact with the blade sometimes can occur. This contact usually happens when a blade must curve in order to ride against the glass. This curving of the blade pushes it against the sheath and causes wear on both the blade and sheath if no lubricant is used. Using a small amount of our Super Lube® Sheath Lubricant on the inside of the sheath will extend the life of your sheath. This clear, non-toxic formula protects in temperatures ranging from -45°F to + 450°F and its effectiveness will not be reduced by cutting lubricant or water. 3 Oz.

Fein 3/4" Blade • 2

IP FTB208

$67.00

Cutting part is 3/4” long.

Sharpened one side regular, one side serrated.

Fein® Part No. 6 39 03 208 01 0

Package of two.

Equalizer Raven Head Assembly

IP 2202

$71.50

Head assembly for Equalizer Raven ESM517 and ESK518.

Includes part numbers 2202, 2203, 2204, and 2205.

Please refer to schematic breakdown for part identification.

Head Assembly

IP 2602

$77.00

Head assembly for Equalizer™ Falcon® ESM519/ESK520. Includes parts 2602, 2605, 2606, and 2607.

Please refer to schematic breakdown for part identification.

Fein® Mushroom Scraper Blade • 5

IP FTB128

$30.00

The mushroom shape of this blade is perfect for cutting elastic silicone and acrylic connecting joints as well as for separating insulated glass. It’s extremely sharp edges will cut through the hardest of adhesives. Cutting width of 2-9/16”.

Package of 5

Fein® Part No. 6 39 03 128 01 2

DeWalt™ 12V Charger - 20 Volt Li-Ion Battery

IP DCB119

$182.00

12-Volt Automotive Charger for  20-Volt Li-Ion Battery Charger.

Can be used with our 20-Volt Battery DCB200

RipCord™

IP RC300

$43.00

A safer alternative to steel auto glass cutting wire.

Engineered and developed to provide durability, strength, performance, and safety to enhance the cutting results of any auto glass wire cutting system...The RipCord™ is a state of the art material designed to completely eliminate auto body scratching that occurs when using standard steel or braided wire. In conjunction with its anti-scratch quality, RipCord™ has an abrasion resistant technology that offers the auto glass industry its first reusable auto glass removal line.

RipCord™ features a “no load under stress” reaction to line breakage. If the line breaks, it will not retract, spin or coil the way steel and braided wires do. This keeps the technician safe from potential injury.

RipCord™ is packaged in 300 ft. spools. Each length of RipCord™ that the technician uses for cut out is reusable, extending the life of the spool. This new material will perform well with any existing auto glass wire cutting system available on the market today.

ZipKnife™ Long Knife • 20"

IP ZKLK36

$58.00

ZipKnife^™ Long Knives are made with an extremely thin utility knife bracket and are designed to enable quick blade replacements. The knife has no screws, levers, or devices thus lessening the chance of damaging a vehicle. Uses all standard utility knife blades.

• Thin blade holder for hard-to-reach areas

• Quick blade change design

ZipKnife™ Long Knife • 24"

IP ZKLK38

$81.00

ZipKnife^™ Long Knives are made with an extremely thin utility knife bracket and are designed to enable quick blade replacements. The knife has no screws, levers, or devices thus lessening the chance of damaging a vehicle. Uses all standard utility knife blades.

HammerHead™ for Push Knife™

IP PKE104

$18.00

HammerHead™ is an adapter for PushKnife™. When HammerHead™ is installed onto the end of PushKnife™, it acts as a receiving area for a rubber mallet to strike, enabling power from the blow to be transferred to the cutting area and through the urethane.

Fein® SuperCut

IP FSC17

$873.00

Fein SuperCut

 

Fein® tools were introduced into the auto glass industry in the early 1980s and remain one of the most used auto glass removal tools in the world. Fein® has worked to refine their original design and today the Fein® SuperCut has a streamlined design, high-power motor, and a variable speed control. The tool is of the highest quality and uses ball and needle bearings together with a gearbox designed for continuous use and heavy loads.

Each FSC17 kit includes 1-Fein® SuperCut, one blade tool, and a DVD users guide. Everything comes neatly packaged in a plastic carrying case.

Fein® QuickIN

IP FSC17Q

$905.00

Fein® QuickIN

No tools needed to change a blade
This is the same great tool as the Fein® SuperCut, but with the ability to change the blade without tools. Pull the blade retaining lever up and push it forward 180° and the blade retainer drops out of the tool, drop on a new blade, reverse the process and you are ready to continue cutting with a different blade. 

Includes 1-Fein® QuickIN and a DVD users guide. Everything comes neatly packaged in a plastic carrying case.

Viper™ Tool

IP VT1136

$412.00

Invented by: Eric Asbery & Gilbert Gutierrez

The Equalizer® Viper^™ is a wire removal device designed for small quarter glass removals, but can also be used on windshields and back glasses. It’s small, light, and easy to maneuver. Simply use a 1/2” drive ratchet with a 1-1/8” socket slipped over the shaft of the tool to rotate the wire reel. The double direction capability of the reel allows for optimum use and the magnetic points on the ratchet shaft ensure that your ratchet stays firmly attached to the tool, even in steep/vertical scenarios. 

Includes: 1-Viper^™ Tool, 1-1/2” Drive Ratchet & 1-1/8” Socket

This item includes only the tool without accessories.  

Viper™ Deluxe Kit

IP VIP1138

$639.00

Invented by: Eric Asbery & Gilbert Gutierrez

The Equalizer^® Viper™ is a cord and wire removal device designed for small quarter glass removals, but can also be used on windshields and back glasses. The double direction capability of the reel allows for optimum use and the magnetic points on the ratchet shaft ensure that your ratchet stays firmly attached to the tool, even in steep and vertical scenarios.

Deluxe Kit Includes: 1-Viper™ Tool (Includes 1/2" Drive Ratchet & 1-1/8" Socket), 1-Pistol Grip Center Start, 1-Mini Anchor, 1-Venom™ Wire Dispensing Unit, 1-164' Roll of Squire2 Wire, 1-100' Roll of RipCord™HD, 1-Wire Grabber Pliers & Cutter, 7-Guide Pins, 1-Clear Headliner Protector, 1-Clear Dash Protector. All packaged in a soft carry case with foam liner.

Cobra™ Ratchet

IP MRK1108

$79.00

Replacement ratchet for the Equalizer® Cobra™ Wire Removal Tool.

Python™ Cup Assembly

IP PCA1121

$520.00

Equalizer® Python™ is a rotating cord and wire removal system which uses a unique, directional suspension reel that allows for safe and effective glass removal. With just the rotation of the curved stainless steel slide bar, the cord and wire will cut through the toughest urethane with no resistance. 

Slither™ Corner Cutting Assistant

IP CCA1123

$260.00

Slither™ is an orbital suction cup device that can be moved around the windshield so that cutting can be done without moving the Python. The wheel rotates as the wire is being pulled. This makes the Slither™ an easy moving part that has no resistance.

It can be used for corners on your windshields for straight across the top of the windshield, down the A-pillars, back glasses, and most quarter glasses.

Cobra™ Wire Removal Cup Assembly

IP MRH1107

$1089.00

Replacement Cobra™ Wire Removal Cup Assembly.

This item includes only the tool without accessories.  

GripTite™ Handles

IP LWH200

$17.00

GripTite™ Handles are designed with a hollowed-out, wedge-shaped shaft with a unique design that keeps the wire away from your fingers at any angle and gives you a non-slip grip.

Set of two.

TightWire™ Grips

IP TWH500

$16.00

These grips hold cut-out wire quickly and securely. They work equally well with solid, square or braided cut-out wire.

To use, unscrew the two halves and insert the wire end into the hole until the end hits the bottom. Bend the wire over and pull it around the center at least one time. Then twist the handles back together tightly.

Package of 2

GripTite™ VC

IP DWH521

$19.00

GripTite™ wire gripping handles with quick wire release and vacuum cup holders.

Set of two.

SideWinder™ with GripTite™ Handle

IP VSR73E

$194.00

The SideWinder™ acts like another person sitting inside the vehicle pulling the wire back after you have made your cutting stroke. It is manufactured with a powerful vacuum cup that is attached to the inside of the windshield and an aluminum swivel, riding on a ball bearing, allows the swivel to follow the wire. 

Made in the USA.

Kits include one of Each; SideWinder™ cut-out tool, Roll of TW72, Wirestarter™, and handle grip. 

SideWinder™ • With TightWire™ Grip

IP VSR73

$194.00

The SideWinder™ acts like another person sitting inside the vehicle pulling the wire back after you have made your cutting stroke. It is manufactured with a powerful vacuum cup that is attached to the inside of the windshield and an aluminum swivel, riding on a ball bearing, allows the swivel to follow the wire. Made in the USA.

Kits include one of Each: SideWinder™ cut-out tool, Roll of TW72, Wirestarter™, and handle grip. 

Squire™ Wire • 72'

IP SSW508

$11.00

When the Squire™ wire is pulled, the pressure is put on the flat side of the wire but as pressure increase, while cutting, Squire™ takes the path of least resistance, twisting and cutting with the edges of the wire. 

The flat side of Squire™ is .25 mm and the diagonal measure is approximately .35 mm.

The roll measures 72' (22M) long. 

Squire™ Wire • 164'

IP SWL165

$22.00

When the Squire™ wire is pulled, the pressure is put on the flat side of the wire but as pressure increase, while cutting, Squire™ takes the path of least resistance, twisting and cutting with the edges of the wire. 

The flat side of Squire™ is .25 mm and the diagonal measure is approximately .35 mm.

The roll measures 164' (50M) long. 

Squire™ Wire • 10 x 164'

IP SWL165PKG

$200.00

When the Squire™ wire is pulled, the pressure is put on the flat side of the wire but as pressure increase, while cutting, Squire™ takes the path of least resistance, twisting and cutting with the edges of the wire. 

The flat side of Squire™ is .25 mm and the diagonal measure is approximately .35 mm.

Each roll measures 164' (50M) long. 

Squire2™ Wire • 72'

IP STW509

$15.00

Engineered to cut through the newest, toughest, and widest urethane.  Additionally, it will slice right through plastic clips and setting posts that are now being used by automobile manufacturers to place the windshield in the exact position necessary for a perfect fit at the factory. 

Diameter is .055 mm and measures 72' (22M) long.

Squire2™ Wire • 164'

IP STL166

$29.00

Engineered to cut through the newest, toughest, and widest urethane.  Additionally, it will slice right through plastic clips and setting posts that are now being used by automobile manufacturers to place the windshield in the exact position necessary for a perfect fit at the factory.