Auto Glass Tools - Equalizer®

Windshield Wiper Removal Tool

IP WR750

$7.21

This tool makes wiper arm removal fast and easy. Simply place the hook under the arm base, squeeze the wiper arm and tool handle together, and lift the wiper arm right off.

Made in the USA.

Equalizer® Wiper Arm Removal Kit

IP MSP211

$110.00

This kit has a different puller for each type of vehicle and the puller contacts as much of the arm as possible to spread the removing pressure out over a large area. Works on a variety of foreign and domestic vehicles.

The kit consists of 6 windshield wiper arm pullers, 1 slide hammer, 1 pressure spindle, a users guide listing specific uses for each puller and all items packaged in a sturdy plastic carry case.

BigMouth™ Wiper Arm Removal Tool

IP MKP356

$19.00

BigMouth™ Wiper Arm Removal Tool has a 1-3/4" opening between the pressure bolt and the prong jaws, this is important because many newer vehicles have recessed wiper arms with longer, deeper bolts. The entire assembly is made of steel which can be used with a wrench or socket, enabling you to put tremendous pressure on the wiper arm.

Universal Wiper Puller

IP WFA450

$48.00

Our Universal Wiper Puller has two sets of interchangeable arms and is made of hardened steel.

Wiper Arm Removal Tool

IP TWR609

$18.00

Our wiper arm removal tool for bolt-on windshield wipers has a compact design that fits easily into small spaces. Made of steel with a durable plastic handle.

Wiper Puller

IP WP534E

$30.00

Wiper puller removal tool for bolt-on windshield wipers is constructed with a revolving concave head ensuring it does not slip off of the wiper bolt. It also has a steel joining cross member for extra strength.

All-In-One Mirror Tool

IP MT228

$15.00

Equalizer® All-In-One Mirror Tool has six devices that work on a wide range of foreign and domestic vehicles. The MT228 features #2 Phillips, T15, & T20 drivers as well as hook and pick devices that are perfect for loosening, prying, aligning, & unfastening tabs & snaps. Additionally, the All-In-One Mirror Tool includes a spring-latch mirror device for removing mirrors on Ford vehicles built after 2004. 

Invented By: John Wilson

Mirror Bracket Wrench

IP GM602

$12.00

Tool that removes mirrors held in place by a spring clip designed to detach the mirror when the air bag is deployed. 

Removal:

Place the tool under the bottom edge of the windshield where it attaches to the bracket and push the tool toward the glass. This motion will pry the mirror up and off of the bracket.

Spring Latch Rearview Mirror Removal Tool

IP JMR357

$16.00

The JMR357 allows you to slide the locking mirror bracket off a mirror button. Spring latch rearview mirrors have a small spring inside the bracket that is pushed down as you slide the mirror over the mirror button which then springs back into place, locking the mirror in place.  Because this spring is hidden, it is difficult to release. Designed for use on Ford vehicles built after 2004. Made of high-impact plastic.

Removal:

Place the tool at the bottom of the mirror base, flat side against the glass and push the tool into the opening, compressing the spring. Then simply slide the mirror off the mirror button.

T15 & T20 Torx® Mirror Wrench

IP MB743

$4.00

Equipt with a T-15 Torx^® and T-20 Torx^® on opposite ends that conveniently fits in a shirt pocket.

Mirror Hex Wrench

IP MB744

$4.00

Equipt with two hex wrenches for commonly used mirror set screws on opposite ends that conveniently fits in a shirt pocket.

Phillips & T15 Torx® Mirror Wrench

IP MBR600

$4.00

Equipt with a #2 Phillips and T-15 Torx^® on opposite sides to each other.

Ford Rearview Mirror Removal Tool

IP FMR482

$12.00

Use for the removal of older Ford rearview mirrors.

To use slide the prongs between the mirror bracket and the mirror, then use a gentle side to side rocking motion along with upward pressure to dislodge the mirror from the bracket.

Lexus Rearview Mirror Removal & Assembly Tool

IP LRR243

$24.00

For Lexus 300, 330 (1998-2005), 400 & 430 and some Toyota models.

Removal:

A pressure clip holds two small ball bearings in place. The ball bearings lock the rearview mirror assembly to the windshield bracket. When removing the rearview mirror assembly, we recommend that you take the screw out to release the rearview mirror and leave everything else attached to the glass. Once the glass is laying flat on your windshield stand, you can remove the pressure clip with the mirror tool. Use care not to lose the ball bearings.

Installation: 

We suggest putting the bracket on the windshield before installing the glass. When installing the hardware, make sure the guide pin on the removable bracket aligns with the opening on the windshield bracket, and then squeeze the pressure clip and place it inside the bracket so it holds pressure on the two ball bearing supports. The mirror tool hooks and holds the pressure clip so you do not lose it.

Micro Clip Tool

IP MCT829

$13.00

Our new Micro Clip Tool is designed to allow access to tighter spaces to release vehicle moldings from the new smaller clips. The Micro Clip Tool gives the technician the ability to gently push or pull on the small release points of the clip, easily saving the clip and molding for reuse.

Invented By: Jason Lowe

Ford F-150 (2004-2008) Pickup Clip Remover

IP FTF399

$16.00

Used to remove clips from the retainer on the body of the vehicle. Also works on Nissan Maxima and many others. Made of high-quality hardened steel.  

Removal: 

Slip the thin front end of the tool between the tabs on the clip and the receiver clip. Pry up slightly, and all the locking tabs are held apart while the molding is lifted out.

Invented by: Mike Kendall 

ClipFork™ Clip Remover

IP MCR633

$36.00

The Equalizer^® ClipFork^™ will remove step clips used on most Honda vehicles.

Honda & Acura Clip Removal Tool

IP JLT656

$21.00

Designed to work on a wide range of Honda and Acura vehicles with smaller or narrower openings than some of the older clips. 

• Honda Accord (2003 and up)

• Honda Civic (2001 and up)

• Honda Odyssey

• Honda Acura RL, TL and TSX (2005 and up)

A-Pillar Release Tool

IP FCT686

$16.00

This tool works on Ford Flex and Mini Cooper as well as many others with the arrow tipped style clips.

Made in the USA.

Recessed Cowling Clip Removal Tool

IP CTD607

$12.00

Recessed Cowling Clip Removal Tool easily fits down into recessed areas.  To use, slide the tip under the head of the cowling clip, then pull up on the center locking pin and remove the clip.

Cowling Clip Removal Tool

IP CCR819

$36.00

This tool has a small, sharp auger that bites into the plastic head of an expansion-type cowling clip and makes pulling the plastic head possible. The clip will then collapses and can easily be removed. 

Clip Removal Tool

IP TPE657

$12.00

Our Clip Removal Tool has a V-groove with sharpened tips so it will slip under the head of the clip. Simply push the handle down and pry the clips out. Works on many cowling and many drip gaskets.

Door Panel & Cowling Clip Removal Tools

IP CRT250

$53.00

Equalizer™ door panel & cowling clip removal tools are made with different size openings that grab and hold clips. Made in different lengths and configurations so you can place them behind the door panel into hard to reach recessed clips.

Made of the highest quality, heat-treated stainless steel. 

Set of five tools.

Double-End Moulding Release Tool

IP DEC381

$7.00

This tool has a small rubber spacer at each end to keep the tool above the glass by about 1/32" preventing the tool from scratching the glass. It also holds the tool end above the glass, lessening the chance of the tip catching the edge of the glass and breaking it. Made of steel.

Christmas Tree Moulding Remover

IP RFM683

$16.00

This tool is thin enough to fit under moldings and wide enough so as not to tear them. The long curve allows for leverage to pry against the glass. The wide shank is coated with soft plastic so it absorbs shock and is less likely to break the glass.

Made in the USA.

Moulding Release Tool

IP MR747

$9.00

Slide the tool left or right under the molding until it hooks a retaining clip. Rock the tool with a twist of the wrist to pull the clip out slightly. This releases the molding from the clip. Heat treated high carbon steel.

Double-Direction Moulding Release Tool

IP IW1214

$7.00

Our Double-Direction Moulding Release Tool is made of hardened steel and has been an industry standard for over 50 years.

Toyota, Honda, Infiniti, Acura & Subaru Clip Remover

IP TCR370

$18.00

Works on Toyota, Honda, Infiniti, Lexus, Acura & Subaru.

To remove these clips, slide the clip remover under the molding then push the tool down between the clip part that is attached to the body and the part that is attached to the molding. Next pry the clip up lightly. This disengages the teeth and releases the clip.

To remove Toyota clips, push the double-pronged end of the tool toward the pinchweld and push the tool handle downward toward the glass, prying the clip up.

Made in the USA.

PryBaby™

IP GBM446

$24.00

This set contains 5 specially shaped sticks for prying, smoothing, spreading and removing. Each tool is made of a tough yet flexible polycarbonate material.

Tool #1: This widest PryBaby™ is 2-3/8” with one straight chisel and one 90° curve. This tool is great for removing snap-off moldings and cowlings.

Tool #2: Shaped like an installation stick on one end and on the other a tool to remove door panel clips.

Tool #3: One end has an 85° angle and the other end has a 30° angle. Can be used to remove door panels

Tool #4: Very similar to an installation stick but with a 45° angle on one end and a 90° angle on the other.  Very useful for prying small items.

Tool #5: Has a 110° bend that is good for removing door panels when you cannot get into the front part near the door jam area. It has a large oval at one end, so you can press the tool against the door jam without wrapping your hand around it which is important when limited space in that area is available.

PryDaddy™

IP PDT443

$60.00

This set contains 12 tools of which 11 are specially shaped sticks and one is a hammer.  They are for all of your prying, smoothing, spreading, removing, tapping, and pushing needs.

Each tool is made of a tough yet flexible, polycarbonate material.

Comes in a handy roll-up tool pouch.