Auto Glass Tools - Equalizer®

Rain Sensor Level

IP RSL330

$29.00

Rain Sensor Level helps prevent spillovers by providing a perfectly level surface, creating a flawlessly even rain sensor pad, using SensorTack products GEL902 & GEL904. Using the side knobs, adjust the rain sensor platform until the bubble in the level is centered. Then apply your gel to the rain sensor pad for a perfectly even application.

KlingOn™ Single Shot

IP KSS201

$5.00

Single application (0.5ml) of KlingOn™ Rearview Mirror Adhesive. Equalizer® KlingOn™ Slingle Shot Rearview Mirror Adhesive has a squeeze-on primer. The adhesive has a gel-like consistency to keep it from running down the windshield.

To use KlingOn™, clean the glass and mirror bracket thoroughly. Apply the primer on the glass where the bracket will be installed and then apply the primer on the mirror bracket. Let the primer dry  then apply the adhesive to the bracket. When you are ready to install the rearview mirror bracket, be careful to place it exactly where you want it. Be sure and wait 3-4 minutes before installing the rearview mirror back onto the bracket.

BTB Narrow "Winged" Anti-Scratch Pinchweld Preparation

IP WK6NKIT

$92.00

The narrow profile blades provide better clearance when working closely against pinchwelds, roof panels, A-pillars, and trim. Featuring winged edges to prevent scratching and damage to the paint and body. An easily sharpened, sturdy design made to last. Stored in a roll-up, canvas bag.

Set Includes 3-Narrow "Winged" blades (1/2", 3/4" and 1"), one 1-9/16" wide prep blade, 1-WK7 handle,1-hex key, and carry case. 

BTB Narrow "Winged" Anti-Scratch Pinchweld Preparation Blade • 9/16" Wide

IP WK6SN

$19.00

The narrow profile blades provide better clearance when working closely against pinchwelds, roof panels, A-pillars, and trim.

BTB Narrow "Winged" Anti-Scratch Pinchweld Preparation Blade • 3/4" Wide

IP WK6MN

$19.00

The narrow profile blades provide better clearance when working closely against pinchwelds, roof panels, A-pillars, and trim.

BTB Narrow "Winged" Anti-Scratch Pinchweld Preparation Blade • 1" Wide

IP WK6LN

$19.00

The narrow profile blades provide better clearance when working closely against pinchwelds, roof panels, A-pillars, and trim.

BTB Narrow "Winged" Anti-Scratch Pinchweld Preparation Blade • 1-9/16" Wide

IP WK640N

$16.00

The narrow profile blades provide better clearance when working closely against pinchwelds, roof panels, A-pillars, and trim.

Extractor Mini

IP EXT-PRO-MINI

$435.00

Small in size, but hugely versatile, the compact, cordless, EXTRACTOR mini is the ideal tool for working comfortably and safely in tight, confined spaces. With variable speed, ranging from 0 – 3000 spm, this powerful, lightweight tool provides smooth but aggressive cutting action, making it the perfect choice for quarter glass and vent glass removals. Also great for removing insulated glass units, and much more.

INCLUDED WITH THE KIT:

• 2 12v Lithium batteries, rated at 1.5 amp hours each

• 120v – 30 min. battery charger

• 2 blades

• Plastic carry case.

Extractor Lightning

IP EXT-PRO-V120

$439.00

Delivering over 3000 strokes per minute, the all-new EXT-PRO-V120 “LIGHTNING” will quickly power its way through even the toughest of auto glass removals. The variable speed trigger gives you the utmost control, allowing you to complete any task safely and efficiently.

*The EXT-PRO-V120 basic kit now includes our full size plastic tool box / carry case.

THE LIGHTNING KIT INCLUDES:

• 1 delta blade
• 1 pair of safety glasses
• plastic tool box / carry case
• one year warranty

Extractor18

IP EXT-PRO-LT18

$619.00

EXTRACTOR18 offers you the convenience and portability of a cordless tool at an economical price. Powered by NiCad batteries, and an 18 volt motor, EXTRACTOR18 is ready to tackle all of those jobs where you “just can’t plug in”.

INCLUDED WITH THE KIT:

• 1 18v, NiCad batteries, rated at 1.8 amp hours each*
• 1 18v battery charger
• 1 delta blade
• safety glasses
• spray bottle
• plastic tool box/carry case
• one year warranty

*Additional batteries available for purchase.

Extractor 28V Kit

IP EXT-PROV28

$1099.00

For rugged performance and unbeatable strength, look no further than the heavy duty EXT- PROV28. This proven and always reliable Milwaukee Extractor is powered by 28 volt lithium-ion batteries that deliver unsurpassed power and incredible run time.

INCLUDED WITH THE KIT:

• 2 28 volt lithium batteries, rated at 3.0 amp hours each*
• 120v battery charger
• 2 delta blades
• plastic tool box/carry case
• safety glasses
• spray bottle.

*Additional batteries available for purchase.

Extractor Slide Hammerhead

IP EXT-HAMMERHEAD

$169.50

The HammerHead is an economical tool for separating the lower corners of windshields that cannot be cut out with a cold knife! It utilizes standard Extractor blades and comes complete with a 6 ¾” cut out blade. The 21” overall dimension fits most standard tool boxes.

Extractor Narrow Blade 5 3/4"

IP EXT-BLDN

$23.50

Most Extractor blades are now made from stainless steel, and have been cut and tapered to our exacting, custom specifications. The blades offer excellent flexibility and strength. If used correctly, they should last 200 cut-outs or more. Many users report 300 - 400 cut-outs. For best results it is necessary to keep the blade sharp and use adequate water for lubrication. The blades are very easy to sharpen. Simply run across a wet belt sander, grinder or file, putting a 45 degree edge on one side of the blade, in the same manner as you would sharpen a chisel.

Extractor Narrow Blade 8"

IP EXT-BLDN-XL

$33.00

Most Extractor blades are now made from stainless steel, and have been cut and tapered to our exacting, custom specifications. The blades offer excellent flexibility and strength. If used correctly, they should last 200 cut-outs or more. Many users report 300 - 400 cut-outs. For best results it is necessary to keep the blade sharp and use adequate water for lubrication. The blades are very easy to sharpen. Simply run across a wet belt sander, grinder or file, putting a 45 degree edge on one side of the blade, in the same manner as you would sharpen a chisel.

Extractor Narrow Blade 10"

IP EXT-BLDN-XXL

$35.00

Most Extractor blades are now made from stainless steel, and have been cut and tapered to our exacting, custom specifications. The blades offer excellent flexibility and strength. If used correctly, they should last 200 cut-outs or more. Many users report 300 - 400 cut-outs. For best results it is necessary to keep the blade sharp and use adequate water for lubrication. The blades are very easy to sharpen. Simply run across a wet belt sander, grinder or file, putting a 45 degree edge on one side of the blade, in the same manner as you would sharpen a chisel.