Auto Glass Tools - Equalizer®

T-slotted Urethane Knife Blades

IP ABT836

$8.00

T-slotted blades allow you to quickly exchange blades by pulling forward and down on a blade. To put in a new blade, push it into the lower part of the knife, push it up into the locking pins, and then push it backward. This motion locks the blade securely in place until you need to replace it again.

For use in the Equalizer® Samurai. 

Package of 10

Razor Blades

IP BFC81

$5.00

Specializer razor-sharp blades for Nozzle Cutter (NCT308).

Package of five.

Made in Germany.

Large Groove Blade For The U-Groove Cut Out Knife

IP UCL322

$3.00

Cuts a groove for Christmas tree moldings. any technicians use the shortcut method of auto glass installation. When you use this method the bed of urethane remains on the body. When the Christmas tree molding is removed it is impossible to press it back into place. Our U-groove tool solves this problem by cutting a U-shaped groove for the Christmas tree molding to fit into. Two different width blades let you cut narrow or wide grooves. Available with or without a pull handle. Comes with two blades, one small and one large.

Made in the USA.

Small Groove Blade For The U-Groove Cut Out Knife

IP UCS321

$3.00

Cuts a groove for Christmas tree moldings. any technicians use the shortcut method of auto glass installation. When you use this method the bed of urethane remains on the body. When the Christmas tree molding is removed it is impossible to press it back into place. Our U-groove tool solves this problem by cutting a U-shaped groove for the Christmas tree molding to fit into. Two different width blades let you cut narrow or wide grooves. Available with or without a pull handle. Comes with two blades, one small and one large.

Made in the USA.

BTB Pinchweld Preparation Blade • 9/16"

IP WK615

$16.00

Use for pinchweld preparation. This is a blade that works great for Urethane, Body Deadener, and Seam Sealer Removal.

9/16" wide.

BTB Pinchweld Preparation Blade • 1-9/16"

IP WK640

$16.00

Use for pinchweld preparation. This is a wide blade that works great for Urethane, Body Deadener, and Seam Sealer Removal.

1-9/16" Wide.

Spring-Loaded Latch Release Utility Knife

IP SPE242

$8.00

When you pull back on the black latch the entire side of the knife can be lifted up so you can quickly change the blade or turn it around and use the sharp end of the blade. It uses all standard utility knife blades.

Quickchange™ Knife

IP FCS293

$24.00

Equalizer^® Quickchange^™ is perfect for cutting moldings or shaping pieces and parts that do not fit. It is like a regular pocketknife but uses a standard utility knife blade and folds to only 3-1/2" long. It is made of high-quality stainless steel with an aluminum handle and a belt clip. 

Utility Knife Blades • 100

IP UKB498

$17.00

Our utility knife blades will fit all standard utility and cutting knives.

Dispenses blades one at a time from a slot in the top and allows you to safely dispose of the blades by putting them in the bottom of the container when they are worn out.

Package of 100.

Extra Long Utility Knife Blades • 10

IP ULB582

$8.00

You know the problem: you like to use a long knife but the blade never sticks out of the tool far enough to cut through the thick urethane. Standard utility knife blades measure only 2-3/8" long. The maximum cutting area you can get is approximately 1". Equalizer® extra-long utility knife blades measure a big 3-3/4" long and give you an exposed cutting area of, at least, 2-1/4". They are designed so there is more length between the two notches. For this reason, these blades will fit most standard utility knives as well as all long knives that use the standard utility knife blade.

Package of ten. 

Made in the USA.

Extra Long Serrated Utility Knife Blades • 10

IP DD1086

$24.00

Our serrated utility blade is perfect for cutting urethane. The serrated blade causes the blade to cut like a saw and makes cutting very fast. Standard utility knife blades are 2-3/8" long giving you a maximum cutting length of approximately one inch. Equalizer® extra-long serrated utility knife blades measure 3-3/4" long permitting a cutting length of 2-1/4". Designed to have more length between the two notches. These blades will fit most standard utility knives and standard long knives, plus it fits Pipeknives.

Will not fit the following long knives: PN4008L, PN4013, PN4018, PN4024.

On QS358 and QS359, only the first hole can be used. 

Package of ten.

Made in the USA.

Breakaway Blades for Olfa™

IP LB21

$10.00

LB21 fits the Olfa® XL2, Olfa® OLF20, Olfa™ Silver (SVE802), and Olfa® OH1. They will also fit all standard breakaway point knives. When the point of the LB21 breaks or dulls, simply snap off the segments and you have a new, sharp cutting tip.

It is very useful for cutting urethane that is far below the dash of most automobiles.

Package of ten.

 

Olfa® Pro Load Cutter

IP PLC809

$28.00

This revolutionary multi-blade heavy-duty knife easily meets the need for continuous blade change with its automatic blade load feature. Includes auto-lock blade slide, a ratchet blade lock at the tip for extra support while cutting through difficult materials, and a blade storage lock for safety.  The high-impact ABS handle can hold up to 6 -18mm snap-off blades.

Stainless steel blade channel for durability.

Includes three blades.  

Solid Blades For Olfa®

IP SB727

$11.00

SB727 fits the Olfa® XL2, Olfa® OLF20, Olfa™ Silver (SVE802), and Olfa® OH1. They will also fit all standard breakaway point knives. The SB727 is a solid blade that does not have the snap-off segments.

It is very useful for cutting urethane that is far below the dash of most automobiles.

Package of ten.

Breakaway Point Blades • 5

IP HB5

$10.00

Breakaway point blades for OH1 knife.

Package of 5