Auto Glass Tools - Equalizer®

Viper™ Deluxe Kit

IP VIP1138

$639.00

Invented by: Eric Asbery & Gilbert Gutierrez

The Equalizer^® Viper™ is a cord and wire removal device designed for small quarter glass removals, but can also be used on windshields and back glasses. The double direction capability of the reel allows for optimum use and the magnetic points on the ratchet shaft ensure that your ratchet stays firmly attached to the tool, even in steep and vertical scenarios.

Deluxe Kit Includes: 1-Viper™ Tool (Includes 1/2" Drive Ratchet & 1-1/8" Socket), 1-Pistol Grip Center Start, 1-Mini Anchor, 1-Venom™ Wire Dispensing Unit, 1-164' Roll of Squire2 Wire, 1-100' Roll of RipCord™HD, 1-Wire Grabber Pliers & Cutter, 7-Guide Pins, 1-Clear Headliner Protector, 1-Clear Dash Protector. All packaged in a soft carry case with foam liner.

Cobra™ Ratchet

IP MRK1108

$79.00

Replacement ratchet for the Equalizer® Cobra™ Wire Removal Tool.

Python™ Cup Assembly

IP PCA1121

$520.00

Equalizer® Python™ is a rotating cord and wire removal system which uses a unique, directional suspension reel that allows for safe and effective glass removal. With just the rotation of the curved stainless steel slide bar, the cord and wire will cut through the toughest urethane with no resistance. 

Slither™ Corner Cutting Assistant

IP CCA1123

$260.00

Slither™ is an orbital suction cup device that can be moved around the windshield so that cutting can be done without moving the Python. The wheel rotates as the wire is being pulled. This makes the Slither™ an easy moving part that has no resistance.

It can be used for corners on your windshields for straight across the top of the windshield, down the A-pillars, back glasses, and most quarter glasses.

Cobra™ Wire Removal Cup Assembly

IP MRH1107

$1089.00

Replacement Cobra™ Wire Removal Cup Assembly.

This item includes only the tool without accessories.  

GripTite™ Handles

IP LWH200

$17.00

GripTite™ Handles are designed with a hollowed-out, wedge-shaped shaft with a unique design that keeps the wire away from your fingers at any angle and gives you a non-slip grip.

Set of two.

TightWire™ Grips

IP TWH500

$16.00

These grips hold cut-out wire quickly and securely. They work equally well with solid, square or braided cut-out wire.

To use, unscrew the two halves and insert the wire end into the hole until the end hits the bottom. Bend the wire over and pull it around the center at least one time. Then twist the handles back together tightly.

Package of 2

GripTite™ VC

IP DWH521

$19.00

GripTite™ wire gripping handles with quick wire release and vacuum cup holders.

Set of two.

SideWinder™ with GripTite™ Handle

IP VSR73E

$194.00

The SideWinder™ acts like another person sitting inside the vehicle pulling the wire back after you have made your cutting stroke. It is manufactured with a powerful vacuum cup that is attached to the inside of the windshield and an aluminum swivel, riding on a ball bearing, allows the swivel to follow the wire. 

Made in the USA.

Kits include one of Each; SideWinder™ cut-out tool, Roll of TW72, Wirestarter™, and handle grip. 

SideWinder™ • With TightWire™ Grip

IP VSR73

$194.00

The SideWinder™ acts like another person sitting inside the vehicle pulling the wire back after you have made your cutting stroke. It is manufactured with a powerful vacuum cup that is attached to the inside of the windshield and an aluminum swivel, riding on a ball bearing, allows the swivel to follow the wire. Made in the USA.

Kits include one of Each: SideWinder™ cut-out tool, Roll of TW72, Wirestarter™, and handle grip. 

Squire™ Wire • 72'

IP SSW508

$11.00

When the Squire™ wire is pulled, the pressure is put on the flat side of the wire but as pressure increase, while cutting, Squire™ takes the path of least resistance, twisting and cutting with the edges of the wire. 

The flat side of Squire™ is .25 mm and the diagonal measure is approximately .35 mm.

The roll measures 72' (22M) long. 

Squire™ Wire • 164'

IP SWL165

$22.00

When the Squire™ wire is pulled, the pressure is put on the flat side of the wire but as pressure increase, while cutting, Squire™ takes the path of least resistance, twisting and cutting with the edges of the wire. 

The flat side of Squire™ is .25 mm and the diagonal measure is approximately .35 mm.

The roll measures 164' (50M) long. 

Squire™ Wire • 10 x 164'

IP SWL165PKG

$200.00

When the Squire™ wire is pulled, the pressure is put on the flat side of the wire but as pressure increase, while cutting, Squire™ takes the path of least resistance, twisting and cutting with the edges of the wire. 

The flat side of Squire™ is .25 mm and the diagonal measure is approximately .35 mm.

Each roll measures 164' (50M) long. 

Squire2™ Wire • 72'

IP STW509

$15.00

Engineered to cut through the newest, toughest, and widest urethane.  Additionally, it will slice right through plastic clips and setting posts that are now being used by automobile manufacturers to place the windshield in the exact position necessary for a perfect fit at the factory. 

Diameter is .055 mm and measures 72' (22M) long.

Squire2™ Wire • 164'

IP STL166

$29.00

Engineered to cut through the newest, toughest, and widest urethane.  Additionally, it will slice right through plastic clips and setting posts that are now being used by automobile manufacturers to place the windshield in the exact position necessary for a perfect fit at the factory.