Auto Glass Tools - Equalizer®

Belt Moulding Remover

IP BMR1488

$21.00

Belt Moulding Remover is designed to remove and save belt mouldings that are installed with clips.

To use it, place it down into the door panel until the hook fits under the lower edge of the moulding. Then slide the Belt Moulding Remover sideways until it rest against the clip and pull up on the handle; repeat the process until all clips are removed.

Rivet Stem Remover

IP DPO585

$36.00

Rivet Stem Remover has a contoured end so it will sit over the rivet and align itself perfectly with the rivet stem. With several light taps of a hammer, the rivet stem is driven out.

Invented by: David LaPoint 

EasyPunch™

IP AEP1132

$30.00

Equalizer® EasyPunch™ is designed to remove rivet stems with the hammering device built into the EasyPunch™, which is delivered with a simple push on the handle. Eliminates the need for hammering. Not for use on steel rivets.  

When removing door glasses that are held in place by pop rivets you must drill the rivets out. Before you can drill the rivets out, however, you need to remove the rivet stems. To use, simply push on the handle. When depressed 1/2 inch, the spring-loaded punch releases, delivering enough force on the rivet stem that it begins to back out. After a quick series of punches, the stem is removed and you can begin to drill. 

Door Panel Removal Tool

IP DCR244

$10.00

General purpose door panel removal tool.

Made of hardened steel.

Window & Door Clip Remover

IP CT749

$8.00

This Window & Door Clip Remover works on GM, Ford and other common c-clips. The flared sides prevent the metal from damaging the door panel. The unique back-end holds the clip firmly.

Made in the USA.

Compact C-Clip Remover

IP JCS452

$8.00

This Compact C-clip remover has a flat design that will let you use it from all sides.  

Curved Door Upholstery Remover

IP PH1355

$14.00

Designed for removing plastic or metal fasteners in confined places, it works great on the front part of the door where the door jam will often interfere with the removal of the door panel.

To use, place the notch in the tool over the fastener and pry the fastener out of the hole.

Door Upholstery Remover

IP DUR748

$12.00

Our Door Upholstery Remover is for removing plastic or metal fasteners. It is made of hardened steel with a large, comfortable handle. 

To use, place the tool under the edge of the door upholstery panel and insert it into the fastener as far as possible, then simply pry up.

Clip-Zip® Clip Removal Tool

IP CZ444

$30.00

Clip-Zip® Clip Removal Tool works by using the outside portion of the jaws to lay against the body, while the inside portion grabs the clip firmly and lifts up without damaging the panel.  

To use, simply slide the jaws of the tool under the head of the clip and squeeze down on the handle.

Door Upholstery Remover

IP SCR696

$31.00

Features a tapered front to easily fit under all types of clips. Especially great for removing door panels.

To use, spread the jaws slightly so they will go under and around the clip. Then, close the jaws and the tool removes the clip without damage to the clip. 

Made in the USA. 

Springer Clip Removal Tool

IP AP6205

$24.00

The tapered tip allows entry under closely fitted parts and the rounded edges avoid damage to the trim or vehicle.

LongHorn Seat Release Tool

IP JFT323

$32.00

The forked end - For use with 2004-2010 Ford F-150 pickups that have bolted in back glasses. Designed to straddle the catch on the latch of the rear seat so that the tool will not slip off to one side. You then push the latch back to release the catch and the seat can be removed.

Wiper Hose Removal Pliers

IP HRT367

$13.00

HRT367 makes saving old windshield spray jet hoses possible. Wipers hoses can be difficult to remove and save, especially on older vehicles if the hose is brittle. To use, position the hose removal tool against the hose so the black, gripping side sits over the connecting piece, then squeeze. The hose is pushed off quickly and without damage.

Made in the USA.

Slip-N-Slide™ Tab Retractor Tool

IP SNS675

$28.00

Tab Retractor Tool For Door Glass Removal. Made of heavy-duty, flexible plastic that can be bowed in either direction to accommodate all types of removals. *Some vehicles may require the use of 2 tools at once.

For use on select 2009 and newer.

• Dodge
• GM
• Chrysler
• Ford
• Jeep 

To use, just slide the tool between the window glass and the outer belt molding and align the notch with the window tab. Apply firm pressure, wiggle the tool until the tab pushes back and the glass can be removed. 

Invented By: Duane Roser

Snake Eyes™

IP SE545

$375.00

Snake Eyes™ borescope is ideal for examining difficult-to-reach areas normally hidden from sight. Great for pre-inspection to find those hard to see clips, stops, areas with thick urethane, and rust. Once you have identified the problem areas, mark them so you’ll know where to expect challenges during removal. If you repair rust damage, this will help you with your upfront estimates and save time as well; if not you can refer the customer to a body shop before the replacement. Snake Eyes™ comes with borescope imaging body, a camera with cable, accessories (mirror, hook & magnet), USB cable, video-out cable, charger, users manual, and a heavy-duty plastic carrying case.

Features:

Record and playback still images and video clips

3.5 " high resolution full color LCD display (320x240) 
Easy-to-use, multi-language interface
Wide camera angle for in images with 640x480 resolution
With optional removable SD cards, save images and videos to take with    anywhere
On-screen horizontal/vertical reverse
5x digital zoom for increased viewing 
Mini USB connector for uploading images and videos to a computer 
Probe diameter available in either 8.5mm(.33") or  5.5mm(.22") and fits most spark plug holes
White LED to illuminate the inspection area, with illumination control 
View objects as close as 1" 
Oil and scratch resistant tempered glass lens 
1M (39.4") semi-rigid yet flexible watertight shaft 
Built-in rechargeable Li-ion battery with up to 5-6 hours of continuous use.
Ergonomic and durable tool housing 
View objects as close as 1" 
Powered by a Lithium-Ion battery with a battery life of up to 4hrs
Can operate the tool while charging the battery
Composite video output jack (RCA)